Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install pressurised irrigation systems

KHU-AGR-0293

Australian Equivalent

AHCIRG345

Elements

Learning Outcomes

This unit of competency describes the skills and knowledge required to organise resources, set out and prepare an irrigation installation site and install, commission and complete pressurised irrigation system installation. The unit applies to individuals who install pressurised irrigation systems under broad direction and take responsibility for their own work. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Organise resources for installation work

0293.E1.O1Confirm activity to be undertaken, including identifying potential hazards and risks and implementing safe working practices to manage risks

0293.E1.O2Select required materials, tools, equipment and machinery and check for safe operation

0293.E1.O3Check that parts and equipment match system drawings and specifications

0293.E1.O4Select, fit, use and maintain safety and personal protective equipment applicable to the task

0293.E1.O5Carry out pre-operational checks on tools, equipment and machinery

0293.E1.O6Identify environmental considerations of irrigation installation activities

0293.E1.O7Check water supply to ensure that it is compatible with system specifications

E2Set out and prepare site

0293.E2.O1Measure and mark out irrigation lines

0293.E2.O2Confirm trenches are at the specified depth without damage to services, facilities, features and established plants

0293.E2.O3Observe regulations relevant to the situation

0293.E2.O4Use work practices that reflect sustainable horticulture principles and environmental requirements

E3Install irrigation components

0293.E3.O1Interpret the irrigation system plan and, where applicable, supervise contractors and monitor work to ensure it conforms to the plan

0293.E3.O2Assemble and connect components and complete and test joints

0293.E3.O3Fit and adjust fittings and valves and secure all joints

0293.E3.O4Maintain a clean and safe work area while installation work is carried out

E4Commission irrigation system

0293.E4.O1Calibrate testing and monitoring equipment

0293.E4.O2Confirm start-up sequence according to operations manual

0293.E4.O3Flush system as required

0293.E4.O4Identify operating faults and take corrective where required

0293.E4.O5Record work outcomes and report to supervisor

E5Complete installation work

0293.E5.O1Finish off earthworks to specifications

0293.E5.O2Confirm system configuration and capacity matches installation plan

0293.E5.O3Restore site and clear materials and equipment from the site on completion of maintenance works

0293.E5.O4Clean and store tools and equipment according workplace requirements