Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Implement a paving project

KHU-AGR-0344

Australian Equivalent

AHCLSC316

Elements

Learning Outcomes

This unit of competency describes the skills and knowledge required to install and construct a paved surface, including preparing for paving project, setting out and preparing site, implementing the paving project, installing stone paving, checking and cleaning up site. The unit applies to individuals who implement a paving project under broad direction, and take responsibility for their own work and for the quality of the work of others. State/territory licensing, legislative or certification requirements apply in some jurisdictions. Users are advised to check with the relevant regulatory authority.

Elements & Learning Outcomes

E1Prepare for paving project

0344.E1.O1Interpret site plans and specifications

0344.E1.O2Identify potential hazards and risks, and implement safe working practices to manage risks

0344.E1.O3Select tools, equipment and machinery required to implement a paving project and check for safe operation

0344.E1.O4Identify and ameliorate environmental impacts of proposed works

0344.E1.O5Select, fit, use and maintain personal protective equipment (PPE) applicable to the task

0344.E1.O6Organise delivery of materials to site according to workplace priorities

E2Set out and prepare the site

0344.E2.O1Erect site bunting, control pedestrian access and place safety signage

0344.E2.O2Determine, locate and mark out services from site plan

0344.E2.O3Make provision for irrigation lines to cross paved areas

0344.E2.O4Mark out paving pattern according to plans and specifications

0344.E2.O5Place and compact sub-base material to required finished levels

0344.E2.O6Incorporate surface drainage as specified

E3Implement paving project

0344.E3.O1Construct paving according to plans and specification

0344.E3.O2Install appropriate drainage as required

0344.E3.O3Use tools, equipment and machinery safety in accordance with workplace safe operating procedures and workplace health and safety requirements

E4Install stone paving

0344.E4.O1Set out and prepare area to be paved according to site plan

0344.E4.O2Excavate area to shape, depth and dimensions to sub-base level

0344.E4.O3Trim the sub-base to designated level and falls and place and compact base material to finished level

0344.E4.O4Spread bedding material over area and level to designated level and falls

0344.E4.O5Treat, place and fit stone accurately and fill gaps in the pattern within tolerances nominated in site plan and specifications

0344.E4.O6Install edge constraints as required by site plan

E5Check quality of work and clean-up site

0344.E5.O1Inspect quality of finished works to ensure standard of finished paving project is in accordance with design drawings and specifications

0344.E5.O2Clean work-site and dispose of or recycle waste material from site

0344.E5.O3Clean, maintain and store tools, equipment and machinery

0344.E5.O4Identify and report unserviceable tools, equipment and machinery according to workplace procedures