SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Construct landscape features using concrete

KHU-AGR-0345

Australian Equivalent

AHCLSC317

Elements

Learning Outcomes

This unit of competency describes the skills and knowledge required to construct concrete structures and features as a component of landscape project works, including preparing for work, setting out and preparing site, mixing pouring and finishing concrete, checking and cleaning up site. The unit applies to individuals who construct landscape features using concrete under broad direction, and take responsibility for their own work and for the quality of the work of others. State/territory licensing, legislative or certification requirements apply in some jurisdictions. Users are advised to check with the relevant regulatory authority.

Elements & Learning Outcomes

E1Plan and prepare work

0345.E1.O1Interpret site plans and specifications

0345.E1.O2Identify potential hazards and risks, and implement safe working practices to manage risks

0345.E1.O3Check quantity and quality of materials

0345.E1.O4Select tools, equipment and machinery required for construction work and check for safe operation

0345.E1.O5Select, fit, use and maintain personal protective equipment (PPE) applicable to the task

0345.E1.O6Identify and minimise environmental impacts of proposed concrete works

E2Set out and prepare the site

0345.E2.O1Determine, locate and mark out services from site plan

0345.E2.O2Mark out position of structure or feature according to site plan

0345.E2.O3Establish profiles to conform to nominated tolerances

0345.E2.O4Excavate site according to site plan

0345.E2.O5Prepare subsoil by removing all debris, vegetable matter and topsoil to provide a solid foundation for concrete

0345.E2.O6Install drainage systems according to plans and specifications

0345.E2.O7Install form work on site in a manner that will ensure it remains rigid during concrete pouring operations and allow for ease of dismantling without damage to concrete

0345.E2.O8Place and compact sub-base material to required finished levels

0345.E2.O9Complete preparation of site according to type of structure or feature to be constructed

0345.E2.O10Place expansion joints and reinforcement steel according to site plan and specifications

E3Mix and pour concrete

0345.E3.O1Determine proportions for concrete mix according to strength requirements of project

0345.E3.O2Determine volume of dry materials necessary to produce final concrete mix

0345.E3.O3Mix together all dry ingredients and required additives to ensure a thorough blending of all materials is achieved

0345.E3.O4Introduce sufficient water to produce a concrete mix to required consistency

0345.E3.O5Perform concrete slump test

0345.E3.O6Pour concrete to designated levels in a manner to avoid segregation of materials

0345.E3.O7Consolidate concrete using an approved vibration method

E4Finish concrete

0345.E4.O1Screed concrete to desired finished level

0345.E4.O2Apply appropriate trowelling techniques

0345.E4.O3Finish concrete off according to site plan and specifications

0345.E4.O4Install control joints according to site plan and specifications

E5Check quality of work and clean-up site

0345.E5.O1Inspect quality of finished works to ensure required standard has been achieved

0345.E5.O2Remove and clean form work to allow reuse

0345.E5.O3Ensure all clean-up works minimise impact to environment

0345.E5.O4Clean, maintain and store tools and equipment

0345.E5.O5Identify and report unserviceable tools and equipment according to workplace procedures