Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Perform machinery maintenance

KHU-AGR-0475

Australian Equivalent

AHCMOM302

Elements

Learning Outcomes

This unit of competency describes the skills and knowledge required to prepare, inspect, maintain and record maintenance requirements for machinery that is used principally in agriculture, horticulture, and conservation and land management work. The unit applies to individuals who conduct machinery maintenance under broad direction, and take responsibility for their own work. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to maintain equipment

0475.E1.O1Determine job requirements from workplace instructions

0475.E1.O2Source and interpret machinery and equipment operation and maintenance manual servicing information

0475.E1.O3Select suitable and safe work site for maintenance activities

0475.E1.O4Identify workplace hazards, assess risks and implement risk controls

0475.E1.O5Select and check for serviceability tools, equipment and materials according to operation and maintenance manual

0475.E1.O6Fit, use and maintain personal protective equipment according to job requirements and operation and maintenance manual

E2Inspect engine and components

0475.E2.O1Carry out regular engine and component checks on machinery and equipment

0475.E2.O2Lubricate all relevant grease or lubricant points

0475.E2.O3Change oils and filters at intervals prescribed in operation and maintenance manual

0475.E2.O4Check hydraulic hoses and systems for deterioration and rectify defects according to operation and maintenance manual

E3Inspect transmission

0475.E3.O1Check drive and steering clutches for operation and adjust where applicable according to operation and maintenance manual

0475.E3.O2Check transmission oil levels

0475.E3.O3Check tracks or wheels and undercarriage for oil leaks and wear

0475.E3.O4Identify faulty seals or leaks and take corrective actions according to operation and maintenance manual

0475.E3.O5Clean machinery according to workplace requirements

E4Maintain components and attachments

0475.E4.O1Check components for wear and condition

0475.E4.O2Replace worn or unserviceable components according to operator and maintenance manual

0475.E4.O3Complete component inspection and replacement activities in line with workplace procedures

0475.E4.O4Check moving operational components for wear and condition and adjust to the tolerances specified in operator and maintenance manual

0475.E4.O5Clean and maintain work areas and return to operating condition

0475.E4.O6Collect, treat and dispose or recycle waste from maintenance activities according to workplace procedures

E5Record maintenance

0475.E5.O1Record identified faults and defects in machine record

0475.E5.O2Record maintenance procedures in workshop record in line with workplace procedures

0475.E5.O3Report service or repair requirements to management