MLVT
SKILLS PORTAL
ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board
អត្តសញ្ញាណប័ណ្ណសិក្សាអាស៊ីអាគ្នេយ៍ការរៀនសូត្រពេញមួយជីវិត • អធិបតេយ្យដោយការរចនាSEALSOUTH EAST ASIA LEARNING IDENTIFIERកម្ពុជា២០២៦
54
Sector Frameworks
1,164
Qualifications
15,161
Competency Units
10,938
Elements
41,782
Learning Outcomes
2,822
Assessment Packages

Ground spread fertiliser and soil ameliorant

KHU-AGR-0479

Australian Equivalent
AHCMOM306
Elements
5
Learning Outcomes
26

This unit of competency describes the skills and knowledge required to prepare and undertake activities required to ground spread fertiliser and soil ameliorants. This unit applies to individuals who apply industry codes of practice and operating principles to ground spread fertiliser and soil ameliorants under broad direction, and take responsibility for their own work. All work must be carried out to comply with workplace procedures, health and safety in the workplace requirements, legislative and regulatory requirements, manufacturer specifications, sustainability and biosecurity practices. No occupational licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

5
E1Confirm customer requirements
0479.E1.O1Confirm with customer that fertiliser or soil ameliorant products to be spread are consistent with customer order
0479.E1.O2Verify with customer that technical specification of products are acceptable for job
0479.E1.O3Confirm fertiliser order documentation with customer to enable depot and factory traceability
0479.E1.O4Document spreading services agreement according to workplace requirements and industry code of practice
E2Identify features of target area
0479.E2.O1Identify and agree with customer on the location and boundaries of area to be treated and document according to workplace requirements and industry code of practice
0479.E2.O2Visually assess soil type and condition or seek advice from customer
0479.E2.O3Identify environmentally sensitive areas and plan operations to ensure minimum adverse impact and compliance with required buffer zones
0479.E2.O4Inspect and identify features that present a hazard to the operation, consult with customer and take appropriate action to minimise risks
0479.E2.O5Identify the location of services and utilities in consultation with customer and adjust proposed spreading operation
0479.E2.O6Identify local weather and climate conditions and take into account potential impacts when preparing for operation
E3Perform pre-spreading checks
0479.E3.O1Determine rate of spreading and calculate buffer zone allowance
0479.E3.O2Ensure machinery and equipment are clean of soil and/or plant material before it is moved onto site
0479.E3.O3Prepare, set up, calibrate and confirm serviceability of machinery and equipment according to workplace procedures and manufacturer instructions
E4Spread products
0479.E4.O1Select and maintain personal protective equipment to be used by operator and all personnel involved in spreading tasks
0479.E4.O2Fit and use personal protective equipment according to job requirements and task to be completed
0479.E4.O3Apply fertiliser or soil ameliorant in a manner that complies with guidelines on buffer zones and minimises run off into waterways and drains
0479.E4.O4Monitor meteorological conditions before and during application and modify operations as required
0479.E4.O5Identify environmental and biosecurity implications associated with fertiliser or ameliorant application and minimise impact
0479.E4.O6Follow any existing site quarantine or biosecurity protocols
0479.E4.O7Continually monitor workplace hazards and risks, and ensure safety of self, other personnel and equipment
E5Shut down equipment and undertake maintenance requirements
0479.E5.O1Conduct shut down procedures required for ground spread of fertiliser and ameliorant equipment
0479.E5.O2Clean and check serviceability of machinery, equipment and hand tools
0479.E5.O3Perform basic preventative maintenance
0479.E5.O4Record faults for remedial action according to workplace procedures
0479.E5.O5Return machinery, equipment and hand tools to depot or storage area according to workplace procedures
0479.E5.O6Complete operational records according to workplace procedures and industry code of practice
SEAL — South East Asia Learning Identifier & Skills Portal · Prepared for MLVT Executive approval and TVET institute review · Derived from the Australian National Training Register (training.gov.au, CC-BY) and aligned to the Cambodian Qualifications Framework and DSC Standard Training Packages · Delivered via Gibble SMS · July 2026