Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Carry out wool pressing

KHU-AGR-0807

Australian Equivalent

AHCWOL207

Elements

Learning Outcomes

This unit of competency describes the skills and knowledge required to press wool into bales and perform related tasks. This unit applies to individuals who work under general supervision and exercise limited autonomy with some accountability for their own work. They identify and provide solutions to a limited range of predictable problems. All work must be carried out to comply with workplace procedures and work health and safety (WHS) practices according to state/territory health and safety regulations, legislation and standards that apply to the workplace. No licensing, legislative or certification requirements are known to apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare for wool pressing

0807.E1.O1Communicate with wool harvesting team members to identify WHS hazards and report to the supervisor

0807.E1.O2Select, use and fit suitable personal protective equipment (PPE) correctly

0807.E1.O3Check the wool press for safe operation and report any issues to supervisor

0807.E1.O4Carry out any required lubrication and maintenance as directed by supervisor

0807.E1.O5Prepare the work area in readiness for pressing as instructed

0807.E1.O6Check the scales to be used for accuracy and calibrate, if necessary, as instructed

0807.E1.O7Check the press and its location for safety according to workplace standards

0807.E1.O8Check for any defective equipment and report to the supervisor

0807.E1.O9Identify the lines of wool to be pressed and confirm with the supervisor

E2Press wool

0807.E2.O1Apply safe working practices using the available safety equipment

0807.E2.O2Remove contamination from the woolpack and place in the appropriate location

0807.E2.O3Place all wool correctly and evenly in the press, as directed

0807.E2.O4Press bales safely for weight and length as directed

0807.E2.O5Keep work area in a condition that avoids contamination of the wool

E3Close bales

0807.E3.O1Use approved bale dividers as instructed and ensure flaps are correctly fastened

0807.E3.O2Identify bales for branding before removing them from the press

0807.E3.O3Store bales safely, avoiding injury to presser, risk to other workers, and damage to bales and equipment

E4Complete recording requirement

0807.E4.O1Brand bales as directed according to workplace procedures

0807.E4.O2Weigh bales and have weight confirmed by supervisor

0807.E4.O3Record bale weights, numbers and descriptions using the appropriate recording system, as directed, and confirm with the supervisor