MLVT
SKILLS PORTAL
ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board
អត្តសញ្ញាណប័ណ្ណសិក្សាអាស៊ីអាគ្នេយ៍ការរៀនសូត្រពេញមួយជីវិត • អធិបតេយ្យដោយការរចនាSEALSOUTH EAST ASIA LEARNING IDENTIFIERកម្ពុជា២០២៦
54
Sector Frameworks
1,164
Qualifications
15,161
Competency Units
10,938
Elements
41,782
Learning Outcomes
2,822
Assessment Packages

Service bicycle steering systems

KHU-AUT-0048

Australian Equivalent
AURBTD101
Elements
3
Learning Outcomes
12

This unit describes the skills and knowledge required to service bicycle steering systems. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, servicing and testing the bicycle steering system, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

3
E1Prepare to service bicycle steering system
0048.E1.O1Identify job requirements are determined from workplace instructions
0048.E1.O2Inspect condition of steering system for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications
0048.E1.O3Identify hazards associated with the work and manage risks
0048.E1.O4Select and check materials, parts, tools and equipment, including personal protective equipment (PPE), for serviceability
0048.E1.O5Prepare work area and plan service sequence, including post-service testing, to avoid damage to bicycle, minimise waste and use time efficiently
E2Carry out service of steering system
0048.E2.O1Use tools and equipment according to workplace procedures and manufacturer specifications
0048.E2.O2Service bicycle steering system according to job requirements, manufacturer specifications, and safety and environmental requirements
0048.E2.O3Test operation of serviced steering system through its full range and make adjustments as required
0048.E2.O4Report results and quality issues to authorised personnel as required
E3Complete work processes
0048.E3.O1Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
0048.E3.O2Clear work area and dispose of or recycle materials according to workplace procedures
0048.E3.O3Complete documentation according to workplace procedures
About the Skills PortalPrivacy Policy
SEAL — South East Asia Learning Identifier & Skills Portal · Prepared for MLVT Executive approval and TVET institute review · Derived from the Australian National Training Register (training.gov.au, CC-BY) and aligned to the Cambodian Qualifications Framework and DSC Standard Training Packages · Delivered via Gibble SMS · July 2026