MLVT
SKILLS PORTAL
ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board
អត្តសញ្ញាណប័ណ្ណសិក្សាអាស៊ីអាគ្នេយ៍ការរៀនសូត្រពេញមួយជីវិត • អធិបតេយ្យដោយការរចនាSEALSOUTH EAST ASIA LEARNING IDENTIFIERកម្ពុជា២០២៦
54
Sector Frameworks
1,164
Qualifications
15,161
Competency Units
10,938
Elements
41,782
Learning Outcomes
2,822
Assessment Packages

Service bicycle wheels and hubs

KHU-AUT-0053

Australian Equivalent
AURBTJ102
Elements
3
Learning Outcomes
13

This unit describes the skills and knowledge required to service bicycle wheels and hubs. The unit involves preparing for the work, selecting and using specialist tools and equipment, inspecting, removing, adjusting and refitting the bicycle wheels and hubs, and completing workplace processes and documentation. The unit applies to those working in the bicycle retail, service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

3
E1Prepare to service bicycle wheels and hubs
0053.E1.O1Determine job requirements from workplace instructions
0053.E1.O2Research and interpret bicycle manufacturer specifications and service instructions for wheels and hubs
0053.E1.O3Inspect condition of bicycle wheels and hubs for faults and worn or damaged components using visual inspection methods and comparison of measurements against manufacturer specifications
0053.E1.O4Identify hazards associated with the work and manage risks
0053.E1.O5Select and check tools and equipment for serviceability
0053.E1.O6Prepare work area and plan work to avoid damage to bicycle, minimise waste and use time efficiently
E2Carry out service of wheels and hubs
0053.E2.O1Remove bicycle wheels according to workplace procedures and manufacturer specifications
0053.E2.O2Service wheels and hubs according to work plan, manufacturer specifications, and safety and environmental requirements
0053.E2.O3Refit serviced wheels and hubs to bicycle and test and adjust as required according to job requirements and workplace procedures
E3Complete work processes
0053.E3.O1Conduct final inspection according to workplace procedures and confirm bicycle is ready for use
0053.E3.O2Report problems outside own area of responsibility to required person
0053.E3.O3Clear work area and dispose of or recycle materials according to workplace procedures
0053.E3.O4Complete documentation according to workplace procedures
About the Skills PortalPrivacy Policy
SEAL — South East Asia Learning Identifier & Skills Portal · Prepared for MLVT Executive approval and TVET institute review · Derived from the Australian National Training Register (training.gov.au, CC-BY) and aligned to the Cambodian Qualifications Framework and DSC Standard Training Packages · Delivered via Gibble SMS · July 2026