Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Inspect and maintain battery electric vehicles

KHU-AUT-0083

Australian Equivalent

AURETH102

Elements

Learning Outcomes

This unit describes the skills and knowledge required to inspect and maintain battery electric vehicles (BEVs). It involves working with automotive electrical components, maintaining rechargeable energy storage systems (RESS), and performing basic tests on electric drive motors. Importance is placed in the unit on applying both high voltage (HV) rechargeable energy storage systems RESS and separated extra low voltage (SELV) electrical safety procedures. It applies to individuals working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to inspect and maintain BEV

0083.E1.O1Identify job requirements from workplace instructions

0083.E1.O2Access and interpret workplace procedures and manufacturer specifications

0083.E1.O3Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures

0083.E1.O4Identify tools and equipment required for inspecting activity and establishing serviceability according to workplace procedures

E2Test RESS and drive motor system operation

0083.E2.O1Use diagnostic equipment to retrieve system parameters and information

0083.E2.O2Test RESS and vehicle drive motor system for correct operation according to manufacturer specifications

0083.E2.O3Identify problems associated with performance of RESS or drive motor system according to workplace procedures

E3Deactivate vehicle RESS

0083.E3.O1Check vehicle is depowered according to manufacturer specifications and workplace procedures

0083.E3.O2Check vehicle is identified with warning tag or sign to indicate potential hazards

0083.E3.O3Locate SELV supply and disconnect according to manufacturer specifications

0083.E3.O4Locate and remove RESS service plug or manual service and disconnect to depower vehicle HV RESS according to manufacturer specifications

0083.E3.O5Stabilise vehicle and check for zero residual voltage according to manufacturer procedures

0083.E3.O6Secure RESS service plug or manual service disconnect to prevent refitting by third party

E4Check drive motor, electrical subsystems and associated components

0083.E4.O1Check electrical drive motor and electrical subsystem and confirm condition

0083.E4.O2Identify problems associated with performance of electrical drive motor, electrical subsystems and associated components

0083.E4.O3Report corrective action according to workplace procedures

E5Reinitialise vehicle RESS

0083.E5.O1Reconnect SELV and RESS service plug or manual service and disconnect in the correct order and reactivate vehicle

0083.E5.O2Carry out diagnostic tests and confirm correct recalibration of subsystems affected by depower process according to manufacturer specifications

0083.E5.O3Check RESS and vehicle subsystems for correct operation according to manufacture specifications

0083.E5.O4Report post-reactivation faults according to workplace procedures

E6Complete work processes

0083.E6.O1Conduct final inspection according to workplace procedures and confirm vehicle is ready for use

0083.E6.O2Clear work area and dispose of or recycle materials according to workplace procedures

0083.E6.O3Check tools and equipment are stored, and faulty equipment is identified, tagged and isolated according to workplace procedures

0083.E6.O4Complete documentation according to workplace procedures