Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Repair wiring harnesses and looms

KHU-AUT-0103

Australian Equivalent

AURETR010

Elements

Learning Outcomes

This unit describes the performance outcomes required to test an existing wiring harness and loom, remove, fabricate and fit the new wiring harness and loom, and then test its operation. It involves preparing for the task, performing the work, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. The wiring harnesses and looms include those in agricultural machinery, heavy commercial vehicles, light vehicles, vessels, mobile plant machinery, motorcycles or outdoor power equipment. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to repair wiring harness and loom

0103.E1.O1Job requirements are determined according to workplace instructions

0103.E1.O2Technical procedures and information are accessed and interpreted

0103.E1.O3Hazards associated with the work are identified and risks are managed

0103.E1.O4Tools and equipment are selected and checked for serviceability

E2Test wiring harness and loom assembly

0103.E2.O1Wiring harness and loom are inspected for damage

0103.E2.O2Harness and loom are tested using appropriate tools and fault finding techniques according to workplace procedures and safety and environmental requirements, and without causing damage to components or systems

0103.E2.O3Inspection and test results are compared with manufacturer specifications

0103.E2.O4Faults are identified from test results and causes of faults are determined

E3Remove wiring harness and loom

0103.E3.O1Wiring harness, loom assembly and associated components are labelled before removal

0103.E3.O2Harness and loom components are removed according to manufacturer specifications, workplace procedures and safety requirements, and without causing damage to components or systems

E4Repair and refit wiring harness and loom

0103.E4.O1Electrical circuit wiring diagrams are accessed and interpreted from manufacturer and component supplier specifications

0103.E4.O2Harness and loom are repaired or fabricated using appropriate techniques and according to workplace procedures

0103.E4.O3Repaired or fabricated harness and loom assembly is refitted and reconnected according to manufacturer and component supplier specifications

0103.E4.O4Post-repair testing is carried out according to workplace procedures to confirm fault rectification, and any further problems detected as having been introduced during the repair or fabrication process are rectified

E5Complete work processes

0103.E5.O1Final inspection is made to ensure work is to workplace expectations and vehicle, vessel or machinery is presented ready for use

0103.E5.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected

0103.E5.O3Tools and equipment are checked and stored and any faulty electrical equipment is identified, tagged and isolated according to workplace procedures

0103.E5.O4Workplace documentation is processed according to workplace procedures