SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove, inspect and fit earthmoving and off-the-road tyres

KHU-AUT-0231

Australian Equivalent

AURKTJ111

Elements

Learning Outcomes

This unit describes the performance outcomes required to remove, inspect and fit earthmoving and off-the-road (OTR) tyres to construction and mining vehicles. It involves removing the tyre from the rim, identifying and controlling risks, inspecting the tyre, assembling the wheel and rim, recommending required repair action, inflation, deflation, and preparing the tyre, wheel and rim assembly for use or storage. It applies to those who fit tyres to wheel and rim assemblies of equal to or greater than 600 mm (24 inches) nominal diameter and classified as off-the-road, earthmover or industrial tyres.

Elements & Learning Outcomes

E1Assess and control risks

0231.E1.O1Identify hazards and control risks in the work environment according to workplace procedures

0231.E1.O2Identify and apply safety requirements to control hazardous tyre, wheel and rim assembly conditions, noting points where safety checks and controls are required

0231.E1.O3Obtain and interpret emergency procedures related to tyre inflation and be prepared for fires, accidents and emergencies

E2Prepare to remove tyre from wheel or rim

0231.E2.O1Obtain and interpret Original Equipment Manufacturer (OEM) instructions and specification, workplace procedures, safety information and applicable standards for earthmoving and OTR tyres

0231.E2.O2Obtain, interpret, clarify and confirm work requirements

0231.E2.O3Plan sequence of work, noting points where safety checks and controls are required

0231.E2.O4Select and wear personal protective clothing and equipment required for work activities

0231.E2.O5Coordinate and communicate planned activities with others at the site as per work requirements

0231.E2.O6Select and inspect tools and equipment according to OEM specification and workplace procedures

0231.E2.O7Identify tyre, wheel and rim components required to complete work activity

0231.E2.O8Clean tyre, wheel and rim assembly, and inspect visually for damage, wear, corrosion, foreign material, cracks and compatibility of components to assess potential health and safety threats according to workplace procedures

E3Deflate and remove tyre from wheel or rim

0231.E3.O1Deflate tyre according to OEM specification and workplace procedures

0231.E3.O2Verify appropriate deflation of tyre in line with workplace procedures, OEM requirements and Australian standards

0231.E3.O3Apply workplace procedures for the safe removal and purging of hazardous fill substances, tyre additive and nitrogen where required

0231.E3.O4Remove tyre according to workplace procedures and without causing injury or component damage

E4Inspect tyre, wheel or rim and recommend repair and replacement actions for unserviceable components

0231.E4.O1Clean and visually inspect tyre, wheel or rim for serviceability and compatibility for application according to workplace procedures, OEM specification and Australian standards

0231.E4.O2Record and report inspection findings according to workplace procedures

0231.E4.O3Document recommended repair and replacement actions and report to relevant personnel according to workplace procedures

E5Fit tyre to wheel or rim

0231.E5.O1Access and interpret workplace procedures and OEM specification for fitting tyres

0231.E5.O2Assess need for tyre additive and add where required

0231.E5.O3Fit tyre according to workplace procedures, OEM specification and Australian Standards

0231.E5.O4Perform post-fit inspections of tyre, wheel and rim assembly according to workplace procedures to confirm correct assembly, component compatibility, serviceability, and correct seating of components prior to inflation

E6Inflate tyre

0231.E6.O1Identify and apply tyre inflation safety procedures

0231.E6.O2Assess need for nitrogen and add where required

0231.E6.O3Inflate tyre for transport, storage or use according to workplace procedures and OEM specification

0231.E6.O4Monitor tyre, wheel and rim assembly during inflation according to workplace procedures

0231.E6.O5Verify inflation pressure according to workplace procedures and OEM specification

E7Complete work processes

0231.E7.O1Perform final inspection to ensure work meets workplace requirements and OEM requirements

0231.E7.O2Prepare tyre, wheel and rim assembly for use or storage according to workplace procedures

0231.E7.O3Inspect and store tools and equipment according to workplace procedures, tagging or reporting where necessary

0231.E7.O4Complete workplace documentation according to workplace procedures