MLVT
SKILLS PORTAL
ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board
អត្តសញ្ញាណប័ណ្ណសិក្សាអាស៊ីអាគ្នេយ៍ការរៀនសូត្រពេញមួយជីវិត • អធិបតេយ្យដោយការរចនាSEALSOUTH EAST ASIA LEARNING IDENTIFIERកម្ពុជា២០២៦
54
Sector Frameworks
1,164
Qualifications
15,161
Competency Units
10,938
Elements
41,782
Learning Outcomes
2,822
Assessment Packages

Remove, inspect and refit wheel hubs and associated brake components

KHU-AUT-0412

Australian Equivalent
AURTTJ012
Elements
4
Learning Outcomes
14

This unit describes the skills and knowledge required to remove, inspect and refit wheel hubs and associated brake components during the rectification of faults in steering and suspension systems. It involves identifying and confirming work requirements, preparing for the task, removing and refitting the wheel hubs and associated brake components, and completing workplace processes and documentation. This unit applies to those working within the automotive service and repair industry. The hubs and associated brake components include those of light vehicles, four wheel drive vehicles or light commercial vehicles. This unit does not involve servicing or repairing braking systems. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

4
E1Prepare to remove and refit wheel hubs and associated brake components
0412.E1.O1Identify job requirements from workplace instructions
0412.E1.O2Obtain and interpret wheel hub and braking component removal, refitting and adjustment information
0412.E1.O3Identify hazards and environmental issues, assess potential risks and implement control measures in line with workplace policies
0412.E1.O4Identify tools, equipment and materials required for the job and examine for serviceability
E2Remove and inspect wheel hubs and associated brake components
0412.E2.O1Identify components to be removed and remove according to manufacturer specifications, workplace procedures, workplace health and safety and environmental requirements, and without causing damage to components or systems
0412.E2.O2Inspect components according to manufacturer specifications and workplace procedures
0412.E2.O3Report inspection findings and make recommendations for necessary repairs or replacements and adjustments according to workplace procedures
E3Refit and adjust wheel hubs and associated brake components
0412.E3.O1Obtain and interpret refitting information in order to identify refitting options required for the job
0412.E3.O2Fit and adjust wheel hubs and associated brake components according to manufacturer specifications, workplace procedures, workplace health and safety and environmental requirements
0412.E3.O3Tighten wheel hub adjustment and wheel nuts according to manufacturer specifications and workplace procedures
E4Complete work processes
0412.E4.O1Carry out final inspection to ensure correct assembly and operation, and ensure work meets workplace expectations and vehicle is ready for use
0412.E4.O2Clean work area and dispose of or recycle materials according to workplace procedures
0412.E4.O3Examine tools and equipment and store according to workplace procedures
0412.E4.O4Complete workplace documentation according to workplace procedures
About the Skills PortalPrivacy Policy
SEAL — South East Asia Learning Identifier & Skills Portal · Prepared for MLVT Executive approval and TVET institute review · Derived from the Australian National Training Register (training.gov.au, CC-BY) and aligned to the Cambodian Qualifications Framework and DSC Standard Training Packages · Delivered via Gibble SMS · July 2026