Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install side vehicle windows

KHU-AUT-0479

Australian Equivalent

AURVTG011

Elements

Learning Outcomes

This unit describes the performance outcomes required to fabricate templates for vehicle side windows, mark and cut panels, prepare cut edges, cut glass or perspex, and install the side windows. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials, checking material quality, sealing and installing side windows according to manufacturer specifications, cleaning and finishing the windows, and completing workplace processes and documentation. It applies to those working in the automotive glazing service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to install side window

0479.E1.O1Job requirements are determined from workplace instructions

0479.E1.O2Information is accessed and interpreted from manufacturer specifications, workplace procedures, and sealant safety data sheets (SDS)

0479.E1.O3Work is planned to minimise waste and use time efficiently

0479.E1.O4Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly

0479.E1.O5Materials required to install side window are selected and checked for quality

0479.E1.O6Hazards associated with the work are identified and risks are managed

0479.E1.O7Tools and equipment for making opening and installing side window are selected and checked for serviceability

0479.E1.O8Vehicle is protected and safely located according to workplace procedures

E2Fabricate templates

0479.E2.O1Accurate measurements of shape and size of side window are taken in order to prepare templates

0479.E2.O2Suitable materials and equipment are used to fabricate templates

0479.E2.O3Templates are completed according to workplace procedures and without causing damage to vehicle or components

E3Mark out and cut panel for side window

0479.E3.O1Template is used to mark out areas on vehicle to be cut

0479.E3.O2Window opening is cut in panel using approved methods and equipment according to workplace procedures and safety and environmental requirements

0479.E3.O3Panel edges and trim are prepared for installation of side window

0479.E3.O4Panels and trim are reinforced as required to comply with vehicle manufacturer specifications and without causing damage to vehicle or components

E4Install side window

0479.E4.O1Material to be installed in vehicle side opening is selected and prepared

0479.E4.O2Side window is installed to manufacturer specifications using either rubber or direct glazing according to safety and environmental requirements

0479.E4.O3Window in panel opening is secured using approved materials

E5Complete work processes

0479.E5.O1Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, customer is informed of time to wait before driving vehicle, and vehicle is presented ready for use

0479.E5.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0479.E5.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0479.E5.O4Workplace documentation is processed according to workplace procedures