Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove and store vehicle body components

KHU-AUT-0491

Australian Equivalent

AURVTN003

Elements

Learning Outcomes

This unit describes the performance outcomes required to perform pre-repair activities by removing and storing vehicle body components. It involves preparing for the task, selecting and using specialist tools and equipment, following workplace instructions in removing, tagging and storing body components as part of pre-repair requirements, and completing workplace processes and documentation. It applies to those working in the automotive body service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to remove and store vehicle body components

0491.E1.O1Job requirements are determined from workplace instructions

0491.E1.O2Workplace procedures and recommended procedures and specifications are sourced and interpreted from original equipment manufacturer (OEM) or authorised agency

0491.E1.O3Hazards associated with the work are identified and risks are managed

0491.E1.O4Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

0491.E1.O5Work is planned to minimise waste according to workplace procedures

E2Remove, tag and store components

0491.E2.O1Vehicle components are removed according to specifications of OEM or authorised agency

0491.E2.O2Components are tagged and stored according to workplace procedures and without causing damage to system or components

0491.E2.O3Additional parts required to complete repair are identified, listed and reported

E3Clean components prior to repair and storage

0491.E3.O1Vehicle components are cleaned using recommended cleaning methods and materials according to safety and environmental requirements

0491.E3.O2Vehicle components are inspected for damage and repaired according to workplace procedures

E4Complete work processes

0491.E4.O1Final inspection is made to ensure work meets workplace expectations and components are presented ready for use

0491.E4.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0491.E4.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0491.E4.O4Workplace documentation is processed according to workplace procedures