Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove and replace adhesive attached components on vehicles

KHU-AUT-0492

Australian Equivalent

AURVTN005

Elements

Learning Outcomes

This unit describes the performance outcomes required to remove and replace adhesive attached components on vehicles. It involves preparing for the task, selecting and using tools and equipment, removing and replacing mouldings, badges, transfers and decals, selecting adhesives according to manufacturer specifications, and completing workplace processes and documentation. It applies to those working in the automotive body service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to remove and replace adhesive attached components on vehicles

0492.E1.O1Job requirements are determined from workplace instructions

0492.E1.O2Removal and replacement information for adhesive attached components is sourced and interpreted from manufacturer specifications and workplace procedures

0492.E1.O3Mouldings and decals are sourced and inspected for quality

0492.E1.O4Hazards associated with the work are identified and risks are managed

0492.E1.O5Tools and equipment, including personal protective equipment (PPE), are identified and checked for serviceability

0492.E1.O6Work is planned and removal and replacement procedures are identified to prevent damage to vehicle

E2Remove adhesive attached components on vehicles

0492.E2.O1Removal of adhesive attached components is completed using approved equipment from manufacturer, including hot air guns

0492.E2.O2Reusable adhesive attached components are inspected and cleaned in preparation for replacement

0492.E2.O3Work is completed according to safety and environmental requirements and without causing damage to system and components, including adhesive attached components

E3Attach adhesive components on vehicles

0492.E3.O1Components to be replaced are checked and confirmed to be within manufacturer specifications

0492.E3.O2Adhesive is selected and applied according to product specification

0492.E3.O3Attached components are checked for fit and alignment, and to ensure that they are free of air bubbles

E4Complete work processes

0492.E4.O1Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

0492.E4.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0492.E4.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0492.E4.O4Workplace documentation is processed according to workplace procedures