Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Clean vehicle body and door openings

KHU-AUT-0495

Australian Equivalent

AURVTN008

Elements

Learning Outcomes

This unit describes the performance outcomes required to wash vehicle body exteriors and clean door, hatch and boot openings. It involves preparing for the task, selecting and using cleaning equipment, cleaning and finishing products according to workplace instructions, and completing workplace processes and documentation. It applies to those working in the automotive detailing industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to clean vehicle body and door openings

0495.E1.O1Job requirements are determined from workplace instructions

0495.E1.O2Vehicle manufacturer’s recommended cleaning methods, workplace procedures, and cleaning material safety data sheets (SDS) are sourced and interpreted

0495.E1.O3Cleaning products are selected and inspected for quality and suitability

0495.E1.O4Hazards associated with the work are identified and risks are managed

0495.E1.O5Tools and equipment, including personal protective equipment (PPE), are identified and inspected for serviceability

0495.E1.O6Work is planned to identify cleaning methods, minimise waste, and prevent damage to vehicle

E2Wash and clean vehicle

0495.E2.O1Vehicle body exterior is washed and cleaned according to workplace procedures and customer requirements

0495.E2.O2Vehicle openings, bonnet surrounds, and sill panels are washed and cleaned according to workplace procedures and customer requirements

0495.E2.O3Equipment and cleaning and protection products are used according to vehicle manufacturer recommendations, workplace procedures, and safety and environmental requirements

0495.E2.O4Washing and cleaning are completed according to workplace procedures and environmental requirements, and without causing damage to vehicle electrical and fuel components

E3Complete work processes

0495.E3.O1Final inspection is made to ensure work meets workplace expectations and vehicle is presented ready for use

0495.E3.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0495.E3.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0495.E3.O4Workplace documentation is processed according to workplace procedures