Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove and replace automotive and marine interior trim components

KHU-AUT-0566

Australian Equivalent

AURVTT003

Elements

Learning Outcomes

This unit describes the performance outcomes required to safely remove and replace interior trim in an automotive or marine application. It involves preparing for the task, selecting and using tools and equipment, removing and replacing interior components, conducting a final inspection of work, and completing workplace processes and documentation. It applies to those working in the automotive and marine trimming industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to remove and replace interior trim component

0566.E1.O1Job requirements are determined from workplace instructions

0566.E1.O2Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

0566.E1.O3Interior trim component to be removed and replaced is identified and inspected for damage

0566.E1.O4Hazards associated with the work are identified and risks are managed

0566.E1.O5Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

0566.E1.O6Work is planned to minimise waste and use time efficiently

E2Remove, store and replace trim

0566.E2.O1Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

0566.E2.O2Trim component is safely stored in preparation for replacement

0566.E2.O3Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components

E3Complete work processes

0566.E3.O1Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

0566.E3.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0566.E3.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0566.E3.O4Workplace documentation is processed according to workplace procedures