Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Fabricate and install automotive and marine soft top hoods

KHU-AUT-0578

Australian Equivalent

AURVTT018

Elements

Learning Outcomes

This unit describes the performance outcomes required to measure, mark out and cut, and fabricate and install vehicle or marine soft top hoods. It involves preparing for the task, selecting and using specialist tools and equipment, selecting materials and checking their quality, fabricating and assembling soft top hoods according to vehicle manufacturer specifications and customer instructions, and completing workplace processes and documentation. It applies to those working in the automotive and marine trimming industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to fabricate soft top hood

0578.E1.O1Job requirements are determined from workplace instructions

0578.E1.O2Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted

0578.E1.O3Materials required to fabricate soft top hoods are selected and inspected for quality

0578.E1.O4Hazards associated with the work are identified and risks are managed

0578.E1.O5Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability

0578.E1.O6Work is planned to minimise waste and use time efficiently

E2Undertake fabrication and installation activities

0578.E2.O1Material is measured, marked out and cut using patterns and templates and according to OEM specifications and workplace instructions

0578.E2.O2Specialist tools and equipment are used according to safety and environmental requirements

0578.E2.O3Soft top hood is fabricated and assembled according to job requirements, workplace procedures, and safety and environmental requirements

0578.E2.O4Soft top hood is installed and fastened according to workplace procedures and without causing damage to vehicle or components

0578.E2.O5Installation and fastening are checked for correct operational requirements

E3Complete work processes

0578.E3.O1Final inspection is made to ensure work meets workplace expectations and vehicle or vessel is presented ready for use

0578.E3.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0578.E3.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0578.E3.O4Workplace documentation is processed according to workplace procedures