Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Carry out oxyacetylene brazing of components

KHU-AUT-0583

Australian Equivalent

AURVTW002

Elements

Learning Outcomes

This unit describes the performance outcomes required to carry out oxyacetylene brazing. It involves preparing for the task, selecting, setting up and operating an oxyacetylene welding plant, setting gas pressures, identifying and adjusting required flame appropriate to brazing requirements, selecting and using suitable personal protective equipment (PPE), performing oxyacetylene brazing to given specifications, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare to braze components

0583.E1.O1Job requirements are determined from workplace instructions

0583.E1.O2Technical information is accessed and interpreted to enable brazing to be performed according to manufacturer specifications

0583.E1.O3Hazards associated with the work are identified and risks are managed

0583.E1.O4Tools and equipment, including PPE, are selected and checked for serviceability

0583.E1.O5Work is planned to identify brazing methods, minimise waste, and use time efficiently

E2Complete brazing procedures

0583.E2.O1Oxyacetylene equipment is set up, gauges and working pressures are set, and flames are adjusted according to equipment manufacturer operating procedures and workplace procedures

0583.E2.O2Brazing operations are conducted according to job requirements, workplace procedures, and safety and environmental requirements

0583.E2.O3Brazing procedures are completed without causing damage to components or systems

E3Complete work processes

0583.E3.O1Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

0583.E3.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0583.E3.O3Tools and equipment are checked, reported if faulty, and stored according to workplace procedures

0583.E3.O4Workplace documentation is processed according to workplace procedures