Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Carry out oxyacetylene thermal heating and cutting on vehicle body sections

KHU-AUT-0585

Australian Equivalent

AURVTW007

Elements

Learning Outcomes

This unit describes the performance outcomes required to set up an oxyacetylene plant, follow safety requirements, adjust gauges to recommended working pressures, and conduct thermal heating and cutting. It involves preparing for the task, identifying and adjusting flame appropriate to thermal heating and cutting requirements, selecting and using suitable personal protective equipment (PPE), performing oxyacetylene thermal heating and cutting to given instructions, and completing workplace processes and documentation. It applies to those working in the automotive service and repair industry. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Prepare for the job

0585.E1.O1Job requirements are determined from workplace instructions

0585.E1.O2Equipment manufacturer operating procedures and workplace procedures are accessed and interpreted

0585.E1.O3Materials for oxyacetylene thermal heating and cutting are selected and inspected for quality

0585.E1.O4Hazards associated with the work are identified and risks are managed

0585.E1.O5Tools and equipment and PPE are selected and checked for serviceability

0585.E1.O6Work is planned to minimise waste and use time efficiently

E2Conduct thermal heating and cutting activities

0585.E2.O1Work area is prepared according to workplace instructions and workplace procedures

0585.E2.O2Oxyacetylene equipment is set up, gauges and pressures are set, and flames are adjusted according to equipment manufacturer operating procedures and workplace procedures

0585.E2.O3Metal temperatures are monitored using a range of methods

0585.E2.O4Thermal heating and cutting are carried out according to safety and environmental requirements and without causing damage to vehicle or components

E3Complete work processes

0585.E3.O1Final inspection is made to ensure work meets workplace expectations and component is presented ready for use

0585.E3.O2Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored

0585.E3.O3Tools and equipment are checked, maintained and reported if faulty, and stored according to workplace procedures

0585.E3.O4Workplace documentation is processed according to workplace procedures