Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Carry out tuck pointing and repointing to masonry

KHU-CON-0084

Australian Equivalent

CPCCBL3017

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to apply repointing and decorative tuck pointing for joint finishes to masonry on different types and styles of buildings. This unit applies to bricklayers, and stonemasons who work on new, existing and heritage structures. It is suitable for people operating with some autonomy. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare for work.

0084.E1.O1Select, correctly fit and use personal protective equipment (PPE) appropriate for job.

0084.E1.O2Read and interpret brickwork tuck pointing and repointing requirements from work instructions, standards and codes.

0084.E1.O3Follow relevant information from work workplace safety, workplace procedures and environmental documentation.

0084.E1.O4Use measurements and apply formulas to calculate material quantities.

0084.E1.O5Determine job priorities and sequence job tasks in conjunction with others on site.

0084.E1.O6Identify potential hazards and determine and implement control measures.

0084.E1.O7Select and check condition of plant, equipment and tools and report damage or faults to relevant person.

0084.E1.O8Check conformity of materials against the specifications.

E2Prepare brickwork surfaces.

0084.E2.O1Remove individual loose or broken bricks.

0084.E2.O2Match and replace broken bricks.

0084.E2.O3Scrap mortar joints to specified depth.

0084.E2.O4Clean brickwork surface and joints in preparation for tuck pointing and repointing.

0084.E2.O5Form an indent key to bond with joint finishing material.

0084.E2.O6Prepare mortar/putty to required colour and mix.

E3Carry out tuck pointing and repointing.

0084.E3.O1Apply decorative tuck pointing to bed and perpendicular joints to specified depth and shape.

0084.E3.O2Repoint masonry joints ensuring that bed and perpendicular joints are compacted and full.

0084.E3.O3Remove excess putty/mortar.

0084.E3.O4Repair any imperfections and lightly brush down brickwork.

E4Clean up.

0084.E4.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0084.E4.O2Clean tools and equipment, check for serviceability and report any damage or faults.

0084.E4.O3Store and secure tools and equipment.