SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Use explosive power tools

KHU-CON-0134

Australian Equivalent

CPCCCM2007

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to safely and effectively operate explosive power tools (EPTs) using explosive charges in a magazine to fasten materials or fix fasteners to bases. The unit supports the application of knowledge to safely and effectively use a range of indirect action explosive powered fastening tools used in the construction industry. It applies to workers who work with EPTs in the construction industry. It involves working under supervision in a team environment. No licensing, legislative, or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare to set up, operate and maintain indirect action EPTs.

0134.E1.O1Review and clarify task to set up, operate and maintain indirect action EPTs.

0134.E1.O2Review work health and safety (WHS) requirements for the task in accordance with safety plans and policies.

0134.E1.O3Identify safety signage and barricade requirements.

0134.E1.O4Review environmental requirements for the task in accordance with environmental plans and legislative requirements.

0134.E1.O5Calculate material quantity requirements.

0134.E1.O6Check EPTs for operation in accordance with manufacturers’ specifications and safety requirements for use of EPT.

E2Set out fasteners.

0134.E2.O1Erect identified safety signage and barricades, and fit personal protective equipment (PPE).

0134.E2.O2Select fastener in accordance with requirements of the job.

0134.E2.O3Set-out fasteners adhering to minimum distances for set out from edge of substrate material in accordance with requirements.

0134.E2.O4Position material, check it is level, and temporarily fix or clamp into designed position in accordance with detailed drawings.

E3Operate EPTs.

0134.E3.O1Select charge in accordance with the requirements for material, base and penetration.

0134.E3.O2Install any attachments and accessories to EPT in accordance with manufacturers’ specifications and WHS requirements.

0134.E3.O3Load fastener and charge into EPT in accordance with manufacturers’ specification.

0134.E3.O4Carry out EPT operation and fix fastener into place in accordance with manufacturers’ specifications and legislative requirements.

0134.E3.O5Check depth of fastening penetration and adjust power regulating device in accordance with conditions.

0134.E3.O6Carry out misfire procedures in accordance with manufacturers’ specifications and legislative requirements.

0134.E3.O7Remove temporary holdings and fixings without damage to material.

E4Maintain EPTs and kit.

0134.E4.O1Check safety features of tools for serviceability in accordance with manufacturers’ specifications.

0134.E4.O2Clean and lubricate tools in accordance with manufacturers’ specifications.

0134.E4.O3Carry out periodic maintenance service in accordance with manufacturers’ specifications.

0134.E4.O4Replenish diminished stocks of charges and fasteners to designed effectiveness of EPT kit.

0134.E4.O5Check and complete logbook and record maintenance in accordance with manufacturers’ specifications.

E5Secure and store EPT equipment and charges.

0134.E5.O1Store used charges in designated container in accordance with requirements.

0134.E5.O2Store unused fasteners, the EPT and attachments in a carry case in line with manufacturers’ specifications.

E6Clean up after operating EPTs.

0134.E6.O1Clear work area and dispose of, re-use or recycle materials in accordance with legislation, regulations, codes of practice and task requirements.

0134.E6.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications and workplace requirements.