Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Select and use small plant and equipment for demolition tasks

KHU-CON-0149

Australian Equivalent

CPCCDE3018

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to select and use small plant and equipment safely and effectively to complete individual demolition tasks, such as breaking concrete, stripping out interior of buildings, pulling down walls and separating waste for recycling. The unit applies to workers performing on-site specialist demolition work using powered small plant and equipment on public, residential, commercial and industrial buildings. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Ca

Elements & Learning Outcomes

E1Plan and prepare for work.

0149.E1.O1Obtain, confirm and apply work instructions to planning and preparation, using required information, and in consultation with colleagues or supervisors.

0149.E1.O2Complete tasks according to regulatory, legislative and workplace policies and requirements.

0149.E1.O3Identify and apply work health and safety (WHS) requirements to task planning according to safety plans.

0149.E1.O4Identify and apply environmental requirements according to environmental plans.

0149.E1.O5Identity, select and fit personal protective equipment (PPE).

E2Identify and check small plant and equipment.

0149.E2.O1Identify and check small plant and equipment to be used in the demolition process for serviceability and rectify and report faults.

0149.E2.O2Identify functions and methods of operation of demolition small plant and equipment from specifications, standards and manufacturer instructions.

0149.E2.O3Identify and apply specific WHS requirements for the selected small plant and equipment.

E3Complete demolition tasks.

0149.E3.O1Obtain confirmation from supervisor and regulatory authorities that existing services have been disconnected.

0149.E3.O2Conduct worksite inspection and assess hazards associated with individual demolition tasks immediately prior to commencing work according to workplace procedures.

0149.E3.O3Amend safe demolition work method if required and confirm with colleagues or supervisor.

0149.E3.O4Prepare work area for the use of demolition small plant and equipment.

0149.E3.O5Select small plant and equipment that meet the requirements of the demolition task.

0149.E3.O6Complete pre-operational checks according to manufacturer recommendations.

0149.E3.O7Use small plant and equipment for their intended purpose in demolition tasks.

0149.E3.O8Communicate work progress and hazards or issues arising during work tasks with work team.

0149.E3.O9Place small plant and equipment in safe locations when not in immediate use.

E4Clean up work area.

0149.E4.O1Clear work area and sort materials for reuse, recycling or removal and dispose of waste using safe manual-handling or plant techniques.

0149.E4.O2Clean, check, maintain and store small plant and equipment according to manufacturer recommendations.