Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Select and use tools and equipment for hot work in the demolition industry

KHU-CON-0151

Australian Equivalent

CPCCDE3020

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to cut materials using cutting processes that create a heat source that could cause an ignition. The unit covers the safe operation and maintenance of tools and equipment for hazardous demolition hot work. It includes the safe on-site operation and maintenance of tools and equipment used for hazardous demolition hot work. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Hot work permits and licenses for the operation of specialised hot-work equipment are required in different states and territories. Licensing, legislative, regulatory or certification requirements apply to d

Elements & Learning Outcomes

E1Plan and prepare for work.

0151.E1.O1Obtain, confirm and apply work instructions to planning and preparation, using required information, and in consultation with colleagues or supervisors.

0151.E1.O2Complete tasks according to regulatory, legislative and workplace policies and requirements.

0151.E1.O3Identify and apply site work health and safety (WHS) requirements to task planning according to safety.

0151.E1.O4Identify, select and fit personal protective equipment (PPE).

0151.E1.O5Conduct worksite inspection and assess hazards associated with individual demolition hot work tasks immediately prior to commencing work.

0151.E1.O6Identify and apply environmental requirements according to environmental plans.

0151.E1.O7Obtain and check permits for hot work and licences for specialised equipment before starting work.

E2Select tools and equipment and prepare for use.

0151.E2.O1Select tools and equipment for different hot work tasks according to manufacturer recommendations.

0151.E2.O2Complete pre-operational checks and maintenance requirements according to manufacturer recommendations and rectify and report faults.

0151.E2.O3Identify and apply specific WHS requirements and safe methods of operation of tools and equipment for hot work from manufacturer instructions.

E3Complete cutting, grinding and hot work.

0151.E3.O1Obtain confirmation from supervisor and regulatory authorities that existing services have been disconnected.

0151.E3.O2Amend safe demolition work method statement if required and confirm with colleagues or supervisor.

0151.E3.O3Prepare work area for hot work according to site safety requirements.

0151.E3.O4Use tools and equipment for their intended purpose in hot work demolition tasks.

0151.E3.O5Communicate work progress and hazards or issues arising during work tasks with work team.

0151.E3.O6Place tools and equipment in safe locations when not in immediate use.

E4Clean up work area.

0151.E4.O1Clear work area and sort materials for reuse or recycling and remove or dispose of waste using safe manual-handling techniques.

0151.E4.O24.2 Clean, check, maintain and store tools and equipment according to manufacturer recommendations.