SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Manage demolition recyclable waste materials and contaminated soil using load shifting equipment

KHU-CON-0153

Australian Equivalent

CPCCDE3022

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to organise the removal of different types of demolition recyclable and waste materials and contaminated soil. It involves the operation of a range of load shifting equipment on demolition sites and incorporates knowledge of recyclable materials and the safe disposal of hazardous materials. The unit does not provide training and assessment for operation of individual items of plant. Candidates may only enrol in this unit after successfully completing separate operator training and assessment that confirms the capability of the person to safely operate the items of plant covered in this unit. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to wo

Elements & Learning Outcomes

E1Plan and prepare for work.

0153.E1.O1Obtain work instructions using required information, confirm and apply to planning and preparation.

0153.E1.O2Complete tasks according to manufacturer specifications and regulatory, legislative and workplace policies and requirements.

0153.E1.O3Identify and apply work health and safety (WHS) requirements to task planning.

0153.E1.O4Select load shifting equipment, associated attachments and emergency and personal protective equipment (PPE) to maximise efficiency and effectiveness of transportation.

0153.E1.O5Present licence to operate specific plant to relevant personnel for compliance inspection.

0153.E1.O6Identify and deal with potential hazards and risks.

0153.E1.O7Identify and apply environmental requirements to work planning.

E2Perform routine checks on load shifting and other equipment.

0153.E2.O1Inspect load shifting equipment and rectify or report faults as required.

0153.E2.O2Conduct service checks and test load shifting equipment systems to ensure compliance with manufacturer specifications.

0153.E2.O3Check emergency and PPE to ensure it is serviceable.

0153.E2.O4Check associated equipment to ensure that it is operational and complies with manufacturer specifications.

E3Organise materials and equipment for loading.

0153.E3.O1Confirm with relevant personnel worksite procedures for segregating and locating recyclable and waste demolition materials.

0153.E3.O2Identify recyclable materials to be loaded and check to ensure integrity of on-site sorting, as required.

0153.E3.O3Identify waste materials to be loaded and check to ensure integrity of containment, as required.

0153.E3.O4Determine loading procedures according to material or waste type.

0153.E3.O5Park load shifting equipment or set up in a loading position that ensures efficiency and safety of loading.

0153.E3.O6Erect barriers and warning signs at loading sites to ensure safety of surrounding personnel.

E4Load and move materials.

0153.E4.O1Load materials safely and efficiently according to type and using an approved loading method to maintain integrity.

0153.E4.O2Maintain visual checks of load and surrounding environment to identify and avoid, minimise or remedy potential hazards.

0153.E4.O3Maintain clear communication with relevant personnel.

0153.E4.O4Check load to ensure it conforms to equipment capacity requirements, manufacturer specifications, and requirements of relevant legislation and codes.

0153.E4.O5Operate and drive equipment in a safe and efficient manner following all road and traffic regulations.

0153.E4.O6Move and secure materials safely.

E5Unload and store materials.

0153.E5.O1Unload materials safely and efficiently in designated area according to type and using an approved unloading method to maintain integrity.

0153.E5.O2Maintain visual checks to identify and remedy potential hazards during unloading.

0153.E5.O3Stack or house load at destination.

E6Shut down and secure load shifting equipment.

0153.E6.O1Park or store equipment in a safe location to avoid damage to equipment or obstruction of surrounding site activity.

0153.E6.O2Complete shutdown procedures.

0153.E6.O3Secure and store equipment in a manner that prevents unauthorised access or use.

E7Carry out basic housekeeping and maintenance.

0153.E7.O1Clean equipment to remove debris and contamination and to ensure safe operating procedures.

0153.E7.O2Conduct service checks.

0153.E7.O3Report equipment faults and defects to relevant personnel.

0153.E7.O4Complete record of moving activities promptly.