SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Operate skid steer loaders at ground level on demolition sites

KHU-CON-0154

Australian Equivalent

CPCCDE3023

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to operate a skid steer loader at ground level in the demolition industry. It includes planning and preparing; conducting machine pre-operational checks; preparing a site for the demolition process; removing demolition debris; selecting, removing and fitting loader attachments; removing demolition materials and waste; relocating skid steer loaders; and carrying out machine operator maintenance. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates

Elements & Learning Outcomes

E1Plan and prepare for work.

0154.E1.O1Interpret and apply compliance requirements to skid steer loader operations.

0154.E1.O2Complete tasks according to manufacturer specifications and regulatory, legislative and workplace policies and requirements.

0154.E1.O3Obtain work instructions, confirm with team members and other relevant personnel, and apply to planning and preparation.

0154.E1.O4Identify and apply work health and safety (WHS) requirements to task planning.

0154.E1.O5Identify environmental requirements for the project according to environmental plans.

0154.E1.O6Identify, select and fit personal protective equipment (PPE).

0154.E1.O7Check maintenance tools and equipment for serviceability and rectify and report faults.

0154.E1.O8Conduct skid steer loader pre-start, start-up, park and shutdown operational checks.

0154.E1.O9Check skid steer loader controls and functions for serviceability and rectify and report faults.

E2Select, check and fit attachments.

0154.E2.O1Select skid steer loader attachments to carry out tasks consistent with job requirements.

0154.E2.O2Check attachments and connections for excessive wear and replace and report these as required.

0154.E2.O3Fit attachments securely according to safe work method, and fit safety pins or clips.

0154.E2.O4Check hydraulic components and rectify faults or replace components and report these as necessary.

0154.E2.O5Test operation of hydraulic system before applying load.

0154.E2.O6Test attachment operation by raising and lowering attachment and ensure attachment is locked in raised position for travel.

0154.E2.O7Remove, clean and store attachments.

E3Prepare demolition site.

0154.E3.O1Determine and discuss requirements of site demolition plan with team members.

0154.E3.O2Conduct site inspection to determine condition of worksite and surrounds before work begins and amend and approve safe work method statement (SWMS) as required.

0154.E3.O3Obtain confirmation from supervisor and regulatory authorities that all existing above and below ground services have been disconnected.

0154.E3.O4Identify hazardous material for separate handling according to workplace requirements and instructions.

0154.E3.O5Position mechanical equipment and plant in operating locations and arrange appropriate exclusion zone and traffic control.

E4Operate skid steer loader for demolition process.

0154.E4.O1Identify and apply skid steer loader general operating techniques to achieve optimum output while achieving specified tolerances.

0154.E4.O2Identify site hazards associated with skid steer loader demolition operations and follow safe operating techniques to minimise risks.

0154.E4.O3Move skid steer loader safely between work locations, observing codes and traffic management requirements.

0154.E4.O4Implement control measures to manage hazards arising from demolition process according to the demolition plan, safe work methods and regulatory requirements.

0154.E4.O5Assess demolition tasks immediately prior to starting and review SWMS to incorporate management of previously undiscovered hazards.

0154.E4.O6Operate skid steer loader at ground level to remove demolition debris using suitable attachments according to approved demolition plan and current safe work method.

0154.E4.O7Maintain communication with team members during the demolition process.

0154.E4.O8Monitor worksite conditions and progress in consultation with team members and stop work or adjust techniques as required.

E5Carry out machine operator inspection and maintenance tasks.

0154.E5.O1Park and shut down skid steer loader safely and remove attachments.

0154.E5.O2Inspect skid steer loader for faults and remove and replace defective parts.

0154.E5.O3Conduct regular programmed operator maintenance tasks.

E6Clean up work area.

0154.E6.O1Clear work area and sort materials and waste and position for removal, as required, and according to site demolition project environmental management plan.

0154.E6.O2Clean, check, maintain and store maintenance tools and equipment.