SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Operate remote-controlled plant on demolition sites

KHU-CON-0156

Australian Equivalent

CPCCDE3025

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to operate remote-controlled plant to conduct high risk demolition operations, such as overhead cutting, sawing and jack hammering, and to operate remote-controlled plant work in restricted spaces, such as tunnels. Remote-controlled plant may be operated at ground level, below ground or on suspended floors. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

Elements & Learning Outcomes

E1Plan and prepare for work.

0156.E1.O1Interpret and apply compliance requirements for remote-controlled plant demolition operations.

0156.E1.O2Complete tasks according to manufacturer specifications and regulatory, legislative and workplace policies and requirements.

0156.E1.O3Obtain work instructions from relevant information, confirm with team members and other relevant personnel, and apply to planning and preparation.

0156.E1.O4Follow instructions and advice from structural engineer regarding load bearing capacities and demolition techniques on suspended floors.

0156.E1.O5Identify and apply work health and safety (WHS) requirements to task planning according to safety plans.

0156.E1.O6Identify environmental requirements for the project according to environmental plans.

0156.E1.O7Identify, select and fit personal protective equipment (PPE).

0156.E1.O8Check maintenance tools and equipment for serviceability and rectify and report faults.

0156.E1.O9Conduct remote-controlled plant pre-start, start-up, park and shutdown operational checks.

0156.E1.O10Check remote-controlled plant controls and functions, including brakes and manoeuvrability, for serviceability, and rectify and report faults.

E2Select, check and fit attachments.

0156.E2.O1Select remote-controlled plant attachments to carry out tasks consistent with job requirements.

0156.E2.O2Check attachments, arms and connections for excessive wear, and replace and report as required.

0156.E2.O3Fit attachments securely according to safe work method and fit safety pins or clips.

0156.E2.O4Check hydraulic components and rectify or replace faulty components and report actions.

0156.E2.O5Test operation of hydraulic system before applying load.

0156.E2.O6Test attachment operation by raising and lowering attachment and lock attachment in raised position for travel.

0156.E2.O7Remove, clean and store attachments.

E3Prepare demolition site.

0156.E3.O1Determine requirements of site demolition plan and discuss these with team members.

0156.E3.O2Conduct site inspection of property or dilapidation survey to determine condition of worksite and surrounds before work begins and amend and seek approval of safe work method statement (SWMS) as required.

0156.E3.O3Obtain confirmation from supervisor and regulatory authorities that all existing services have been disconnected.

0156.E3.O4Identify hazardous material for separate handling.

0156.E3.O5Position mechanical equipment and plant in operating locations and arrange appropriate exclusion zone and traffic control.

E4Operate remote-controlled plant loader for demolition process.

0156.E4.O1Identify and apply remote-controlled plant operating techniques to achieve optimum output while achieving specified tolerances.

0156.E4.O2Identify site hazards associated with remote-controlled plant demolition operations, including position of operator and personnel in relation to plant, equipment and environment and follow safe operating techniques to minimise risks.

0156.E4.O3Move remote-controlled plant safely between work locations and observe relevant codes and traffic management requirements.

0156.E4.O4Implement control measures to manage hazards arising from demolition process according to the demolition plan, safe work methods and regulatory requirements.

0156.E4.O5Assess demolition tasks immediately prior to starting and review SWMS to incorporate management of previously unpredicted hazards.

0156.E4.O6Operate remote-controlled plant at a safe distance to demolish building elements using suitable attachments according to approved demolition plan and current safe work method.

0156.E4.O7Maintain communication with team members during the demolition process.

0156.E4.O8Monitor worksite conditions and progress in consultation with team members and stop work or adjust techniques as required.

E5Carry out machine operator inspection and maintenance tasks.

0156.E5.O1Carry out machine operator inspection and maintenance tasks.

0156.E5.O2Carry out machine operator inspection and maintenance tasks.

0156.E5.O3Carry out machine operator inspection and maintenance tasks.

E6Clean up work area.

0156.E6.O1Clear work area and sort materials and waste and position for removal, as required, according to site demolition project environmental management plan.

0156.E6.O2Clean, check, maintain and store maintenance tools and equipment.