Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Assemble components

KHU-CON-0174

Australian Equivalent

CPCCJN2001

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to assemble manufactured components to form a completed constructed unit, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0174.E1.O1Read and interpret work instructions and plan sequence of work.

0174.E1.O2Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0174.E1.O3Select tools and equipment, check for serviceability and report any faults.

0174.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0174.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0174.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Assemble and hold components in place.

0174.E2.O1Select component parts for assembly and prepare hardware.

0174.E2.O2Select and use packing material for protection of surfaces during assembly.

0174.E2.O3Apply adhesive according to specifications.

0174.E2.O4Locate and hold components in their designed assembled positions.

E3Secure assembled components.

0174.E3.O1Secure frame or unit using appropriate assembly methods.

0174.E3.O2Secure fastened joints by fasteners or hardware.

E4Finish assembly and clean up.

0174.E4.O1Dismantle assembly and holding system.

0174.E4.O2Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0174.E4.O3Check, maintain and store tools and equipment and report any faults.