Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Manufacture and assemble joinery components

KHU-CON-0178

Australian Equivalent

CPCCJN3004

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to carry out machining and manufacturing and assembling joinery components, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0178.E1.O1Read and interpret work instructions and plan sequence of work.

0178.E1.O2Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0178.E1.O3Select tools and equipment, check for serviceability and report any faults.

0178.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0178.E1.O5Inspect workplace, assess hazards and apply risk controls.

0178.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Manufacture components.

0178.E2.O1Determine types of component parts from working drawings and specifications.

0178.E2.O2Select processes for manufacture, joining techniques and components.

0178.E2.O3Select machines to be used and plan sequence of machining.

0178.E2.O4Check safety requirements for each machine for compliance with WHS requirements and AS 1473 Guarding and safe use of woodworking machinery.

0178.E2.O5Determine space requirements for manufacture of components.

0178.E2.O6Use machine to manufacture components to working drawings and specifications.

E3Assemble components.

0178.E3.O1Check components for accuracy, quality and suitability by dry-assembling components in their assembled positions.

0178.E3.O2Assemble and secure components using adhesive and mechanical fasteners to specification.

0178.E3.O3Check assembled units for square, free of wind and with adhesive removed.

E4Check and assembled units and prepare for packaging.

0178.E4.O1Inspect assembled units for faults and take appropriate remedial action.

0178.E4.O2Make units ready for packaging by protecting material edges and surfaces and stacking.

E5Clean up.

0178.E5.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, recycling and re-use and materials handling.

0178.E5.O2Check, maintain and store tools and equipment and report any faults.