Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Cut and install glass

KHU-CON-0179

Australian Equivalent

CPCCJN3005

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to manually cut glass in a straight line to form simple shapes and install glass in joinery structures, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0179.E1.O1Read and interpret work instructions and plan sequence of work.

0179.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0179.E1.O3Select tools and equipment, check for serviceability and report any faults.

0179.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0179.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0179.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Cut glass to a straight line.

0179.E2.O1Select type, size and thickness of glass for application (thickness less than 6.38mm) and determine location from drawings, specifications and glazing schedule and in accordance with AS 1288 Glass in building - Selection and installation.

0179.E2.O2Inspect openings to receive glass for obstructions and clearances.

0179.E2.O3Select cutting process in accordance with AS 4667 Quality requirements for cut to size and processed glass and cut glass to specification on a line using straight edge and scoring and breaking to run cut to tolerance of AS 4667.

0179.E2.O4Cut glass sheets to the most economical layout, identifying cutting defects and taking corrective action in accordance with AS 4667.

E3Cut glass to simple shapes.

0179.E3.O1Select type, size and thickness of glass for application and mark and prepare template to designed shape and requirements of AS 1288.

0179.E3.O2Use template and marker to transfer outline onto glass.

0179.E3.O3Cut glass to shape and size to specification and remove glass offcuts safely in accordance with AS 4667.

0179.E3.O4Cut glass sheets to the most economical layout, identifying cutting defects and taking corrective action in accordance with AS 4667.

E4Install glass to joinery.

0179.E4.O1Prepare frame for installation of glass.

0179.E4.O2Confirm dimensions of frame are adequate for installation of glass.

0179.E4.O3Install glass to frame.

0179.E4.O4Clean glass surface and surrounding frame and remove waste material.

E5Clean up.

0179.E5.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling, including handling glass.

0179.E5.O2Check, maintain and store tools and equipment and report any faults.