Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Process materials to produce components using static machines

KHU-CON-0180

Australian Equivalent

CPCCJN3100

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to use static machines for manufacturing processes of components, meeting all relevant requirements of Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0180.E1.O1Read and interpret work instructions and plan sequence of work.

0180.E1.O2Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0180.E1.O3Select tools and equipment, check for serviceability and rectify or report any faults.

0180.E1.O4Select and use personal protective equipment (PPE) for each part of the task and as required for using each machine.

0180.E1.O5Inspect workplace, assess hazards and apply risk controls, including required signage and barricades.

0180.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Select static machines and determine operation and safety requirements.

0180.E2.O1Select types and functions of static machines for use in task.

0180.E2.O2Determine methods of operation of machines from manufacturers’ operating manuals and safe operating procedures.

0180.E2.O3Locate cut-off switches and implement WHS requirements for guard attachment and cut-off switches in accordance with Australian Standards.

0180.E2.O4Implement WHS requirements for personal protective equipment (PPE) associated with using machines.

E3Prepare machines for use.

0180.E3.O1Determine and follow guarding and safety requirements for preparing and using each static machine.

0180.E3.O2Set up machines for required operating process and setting with fences and guides locked in position in accordance with Australian Standards.

E4Operate machines.

0180.E4.O1Follow machine start-up procedures to manufacturers’ recommendations and safe operating procedures.

0180.E4.O2Feed material to machines following manufacturers’ recommendations, safe handling procedures and safe operating procedures, including use of push blocks and sticks.

0180.E4.O3Set up and hold material in place, ensuring correct hand position, for moving table operations following manufacturers’ recommendations.

0180.E4.O4Operate machines safely in accordance with designed capacity and purposes.

0180.E4.O5Follow machine workplace shut-down procedures following manufacturers’ recommendations.

E5Maintain machine and attachments.

0180.E5.O1Maintain machines by regular servicing to manufacturers’ recommendations.

0180.E5.O2Report faults to supervisor.

0180.E5.O3Assist with fitting and securing cutters, blades and attachments, and recalibration following manufacturers’ recommendations.

E6Clean up.

0180.E6.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0180.E6.O2Clean, check and store cutters, blades and attachments following manufacturers’ recommendations.