Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Manufacture stair components for straight flighted stairs

KHU-CON-0181

Australian Equivalent

CPCCJS3002

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to manufacture components for straight-flight stairs, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes manufacturing cut and closed stringers, newels, balusters, risers, treads, handrails, landing joists, glue blocks and wedges. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0181.E1.O1Read and interpret work instructions and plan sequence of work.

0181.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0181.E1.O3Select tools and equipment, check for serviceability and report any faults.

0181.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0181.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0181.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Prepare stringers.

0181.E2.O1Set-out stringers for treads and risers with nosing marked accurately and housings cut to set-out and depth.

0181.E2.O2Apply grooves or mortises to receive balusters to set-out.

0181.E2.O3Cut stringers to set-out shape and mark to accommodate treads and risers and junction with newels or landing.

E3Prepare newel posts.

0181.E3.O1Cut and make housings to newel post set-out and required depth.

0181.E3.O2Cut mortises to set-out and required depth, and mark newel posts for identification.

E4Prepare treads, risers and wedges.

0181.E4.O1Cut treads to specified length and shape.

0181.E4.O2Cut risers to designed length, shape and quantity, and apply markings for junctions, stringers and wedges.

0181.E4.O3Cut wedges to specified pitch.

E5Prepare balustrade.

0181.E5.O1Manufacture handrail with groove run for balusters.

0181.E5.O2Set-out mortises for balusters in handrail.

0181.E5.O3Cut balusters to specification.

0181.E5.O4Cut manufactured handrail to length and mark sections.

E6Finish surface and preassemble stair.

0181.E6.O1Sand exposed surfaces of components to specification for finish.

0181.E6.O2Preassemble components to ensure stair will assemble correctly.

0181.E6.O3Disassemble components and prepare/store for transport.

E7Clean up.

0181.E7.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0181.E7.O2Check, maintain and store tools and equipment and report any faults.