SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Manufacture and install continuous handrailing and special stair components

KHU-CON-0183

Australian Equivalent

CPCCJS3004

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to manufacture, join and install continuous handrailing and special stair components, meeting all relevant requirements of the National Construction Code (NCC), Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. The unit includes wreaths, scrolls, bullnose steps and decorative features connecting straight lengths of handrail to wreaths or scrolls, with the use of handrail fittings or bolts to form a continuous handrail system. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirem

Elements & Learning Outcomes

E1Plan and prepare.

0183.E1.O1Read and interpret work instructions and plan sequence of work.

0183.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.

0183.E1.O3Select tools and equipment, check for serviceability and report any faults.

0183.E1.O4Select and use personal protective equipment (PPE) for each part of the task.

0183.E1.O5Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.

0183.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Prepare wreath for continuous handrailing.

0183.E2.O1Determine pitch of stair and change of direction of handrail from stair design.

0183.E2.O2Set out wreath and assess total area required to determine thickness of material to be prepared.

0183.E2.O3Prepare material, cut square to wreath length, and set-out to shape for dressing.

0183.E2.O4Form wreath to square section with designated twist, and free of bumps.

E3Join and mould wreath to straight sections.

0183.E3.O1Mould wreath to handrail shape and fine sand to smooth finish.

0183.E3.O2Measure straight sections of handrail and cut to length with ends square to join wreath with tight joints.

0183.E3.O3Pre-fit handrail in lengths, disassemble and rejoin in location.

E4Manufacture scroll and wreath, and join to handrail.

0183.E4.O1Set out and prepare scroll and wreath to designed shape.

0183.E4.O2Prepare materials to scroll and wreath dimensions, apply set out patterns and form scroll and wreath to basic shapes.

0183.E4.O3Mould scroll and wreath to handrail shape and fine sand to smooth finish.

0183.E4.O4Join scroll and wreath to handrail with tight joints.

E5Manufacture and install bullnose treads.

0183.E5.O1Review design and method of constructing bullnose tread.

0183.E5.O2Manufacture bullnose tread and riser and fix block support.

0183.E5.O3Cut and dress tread with nosing to shape.

0183.E5.O4Fit bullnose tread, riser and to stairs and secure in location.

E6Manufacture and install brackets and decorative features.

0183.E6.O1Fix brackets and scotia and fix into place using the cut and mitred string method.

0183.E6.O2Fix decorative features and sand surfaces to smooth finish to requirements.

E7Clean-up.

0183.E7.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.

0183.E7.O2Check, maintain and store tools and equipment and report any faults.