SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Licence to perform dogging

KHU-CON-0188

Australian Equivalent

CPCCLDG3001

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to safely perform dogging work. Dogging consists of the application of slinging techniques to move a load, including the selection and inspection of lifting gear, and the directing of a plant operator in the movement of a load when the load is out of sight of the operator. Dogging work is conducted in the construction industry and other industries where loads are lifted and moved using cranes or hoists. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Competence in this unit does not in itself result in a licence. A licence is obtained after competence is assessed under applicable Comm

Elements & Learning Outcomes

E1Plan task.

0188.E1.O1Review task instructions, consult with relevant persons to seek clarification as required, and obtain relevant workplace information.

0188.E1.O2Obtain and interpret information, including safe work method statements (SWMSs), required to ensure that activities are performed in compliance with workplace-specific and safe work requirements.

0188.E1.O3Obtain and interpret information required to ensure that equipment inspection, use, maintenance and storage complies with manufacturer requirements.

0188.E1.O4Identify workplace and task-specific hazards and determine required risk controls and safety measures and equipment, including signs and barricades, personal protective equipment (PPE), and fall prevention and fall arrest equipment.

0188.E1.O5Calculate load weight, dimensions and centre of gravity.

0188.E1.O6Determine lifting and slinging points.

0188.E1.O7Calculate derated working load limit (WLL) of lifting equipment resulting from selected slinging techniques.

0188.E1.O8Establish required communication methods with plant operator.

E2Select and inspect equipment.

0188.E2.O1Select risk controls and equipment, including fall prevention and fall arrest equipment, and check that it is working and fit for purpose.

0188.E2.O2Select and check PPE.

0188.E2.O3Select lifting equipment and gear, inspect for defects, and isolate, tag out, report and record defective items.

0188.E2.O4Select communication equipment and check that it is working and fit for use.

E3Set up task.

0188.E3.O1Establish and maintain communication with relevant persons to ensure lift plan and risk controls are communicated clearly, including any impact on other workplace activities.

0188.E3.O2Ensure risk controls and safety measures and equipment have been put in place.

0188.E3.O3Prepare lifting equipment and gear for safe use.

0188.E3.O4Consult with relevant persons to ensure that the load destination is stable, able to bear the load and prepared for safe access and landing.

0188.E3.O5Attach and secure lifting equipment and gear to the plant-designated lifting point.

E4Perform task.

0188.E4.O1Direct plant designated lifting point/hook, over the load’s centre of gravity.

0188.E4.O2Attach and secure lifting equipment and gear to the load using slinging techniques.

0188.E4.O3Attach and secure tag line as required to guide the load.

0188.E4.O4Use signals and radio communication methods to direct the load movement, both in and out of sight of the plant operator.

0188.E4.O5Conduct test lift to check the security of the slings and the stability of the load, lifting equipment and gear.

0188.E4.O6Direct the movement of the load in accordance with lift plan, including lowering and landing.

0188.E4.O7Disconnect lifting gear from the load and direct the positioning of crane or hoist for next task.

E5Pack up and clean up.

0188.E5.O1Remove excess materials from work area.

0188.E5.O2Inspect lifting equipment and gear for defects, and isolate, label and report defective items.

0188.E5.O3Store lifting equipment and gear in accordance with workplace requirements.

0188.E5.O4Remove risk controls and safety measures and equipment.