Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Fix wet area sheets

KHU-CON-0236

Australian Equivalent

CPCCPB3004

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to fix wet area sheets to comply with manufacturer and job specifications. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0236.E1.O1Read and interpret work instructions and plan sequence of work.

0236.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.

0236.E1.O3Select and use personal protective equipment (PPE) for each stage of the task.

0236.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0236.E1.O5Select tools and equipment, check for serviceability and report any faults that may affect the safe operation of the equipment, tag equipment and set aside.

0236.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Plan and cut wet area sheets.

0236.E2.O1Determine work sequences, fixing processes from manufacturers’ specifications and AS/NZS2589 Gypsum linings - application and finishing.

0236.E2.O2Match sheet size to wall dimensions.

0236.E2.O3Plan cutting process to minimise dust exposure for others.

0236.E2.O4Follow manufacturers’ specifications for cutting process and provision for penetrations.

0236.E2.O5Cut sheets to minimise waste and number of joints and maximise board use.

E3Fix wet area sheets.

0236.E3.O1Hang and fix sheets using manual handling techniques and following manufacturer's specifications, ensuring the sheets have appropriate gap from the floor and flashing are installed to specification.

0236.E3.O2Check completed work to ensure stop-up activities can be easily completed.

E4Clean up.

0236.E4.O1Clear work area and dispose of, reuse or recycle materials.

0236.E4.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications