Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply paint by brush and roller

KHU-CON-0259

Australian Equivalent

CPCCPD3022

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply brushed or rolled paint coatings to different materials to form a protective and decorative painted finish. The unit includes preparation of the work area, mixing of materials, application of paint, finishing of the surface and completion of clean-up activities. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of pub

Elements & Learning Outcomes

E1Plan and prepare.

0259.E1.O1Review work instructions to apply paint by brush and roller.

0259.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0259.E1.O3Conduct work with regard to responsibilities in heritage-listed buildings.

0259.E1.O4Select and fit personal protective equipment (PPE) as required for each task.

0259.E1.O5Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0259.E1.O6Identify materials appropriate to the work application, calculate quantities and prepare, handle safely and locate ready for use.

0259.E1.O7Select tools and equipment, check for serviceability and report any faults.

E2Prepare work area and materials.

0259.E2.O1Check that materials and substrate surfaces are prepared in accordance with manufacturers’ recommendations and relevant Australian Standards.

0259.E2.O2Protect surrounding surfaces with drop sheets, masking or removal of objects.

0259.E2.O3Check that where doors, windows and associated furniture are removed they are safely stacked, stored and protected.

0259.E2.O4Check work site to ensure provision of adequate ventilation and implementation of precautions to prevent fire and explosion.

0259.E2.O5Implement measures to ensure application area remains free of dust and foreign matter.

0259.E2.O6Mix each of oil based, water based and two pack paint, to designed proportion, consistency, specified ratio and drying time.

0259.E2.O7Stir paint and colours thoroughly using separate stirring sticks or other devices.

E3Apply paint with brush or roller.

0259.E3.O1Select brush, roller or brush/roller combination for surface profile, size of area, type of paint and finish.

0259.E3.O2Apply paint to achieve required level of opacity, finish, texture and sheen.

E4Clean up.

0259.E4.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0259.E4.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0259.E4.O3Check and maintain tools and equipment and clean with appropriate solvents.

0259.E4.O4Dispose of paint waste and water and solvents used in cleaning painting equipment in an environmentally sustainable manner.

0259.E4.O5Store tools, equipment and sealed unused materials to avoid spontaneous ignition.