Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply paint by spray

KHU-CON-0261

Australian Equivalent

CPCCPD3024

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply paint by spray onto different surfaces to form a protective paint finish. The unit includes preparation of materials and application area, setting up and testing of the spray equipment, application of paint and completion of clean-up activities. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0261.E1.O1Review work instructions to apply paint by spray.

0261.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0261.E1.O3Select and fit personal protective equipment (PPE) as required for each task.

0261.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0261.E1.O5Select tools and equipment, check for serviceability and report any faults.

E2Prepare materials and application area.

0261.E2.O1Check that materials and substrate surfaces are prepared in accordance with manufacturers’ recommendations and relevant Australian Standards.

0261.E2.O2Protect surrounding surfaces with drop sheets, masking or removal of objects.

0261.E2.O3Check that where doors, windows and associated furniture are removed they are safely stacked, stored and protected.

0261.E2.O4Check work site to ensure provision of adequate ventilation and implementation of precautions to prevent fire and explosion.

0261.E2.O5Implement measures to ensure application area remains free of dust and foreign matter.

0261.E2.O6Set up area to suit selected spray system.

0261.E2.O7Mix and adjust viscosity of paint to allow for to allow for application process for spray paint finishing materials.

E3Set up and test spray equipment.

0261.E3.O1Set up and test spray system equipment, accessories and lines to manufacturers’ specifications.

0261.E3.O2Check fittings are secure.

0261.E3.O3Test safety devices are performing to manufacturers’ specifications and report defects.

E4Apply paint using spray system.

0261.E4.O1Operate spray equipment following standard operating procedures and manufacturers’ recommendations.

0261.E4.O2Identify defects in coating and take corrective action to achieve required finish.

0261.E4.O3Apply paint using application technique to achieve an even finish with required opacity and sheen levels and to specification.

E5Clean up.

0261.E5.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0261.E5.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0261.E5.O3Check and maintain spray system, tools and equipment and clean with appropriate solvents.

0261.E5.O4Dispose of paint waste and of water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0261.E5.O5Store spray system, tools, equipment and sealed unused materials to avoid spontaneous ignition.