Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply stains and clear timber finishes

KHU-CON-0263

Australian Equivalent

CPCCPD3026

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply stains and clear timber finishes to different material surfaces, including previously stained or finished timber, to form a protective and decorative finish. The unit includes preparation of the work area and materials, staining of bare timber, application of clear finishes and completion of clean-up activities. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification

Elements & Learning Outcomes

E1Plan and prepare.

0263.E1.O1Review work instructions to apply stains and clear timber finishes.

0263.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0263.E1.O3Select and fit personal protective equipment (PPE) as required for each task.

0263.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

E2Prepare work area and surfaces.

0263.E2.O1Strip and prepare existing stained or finished surfaces for application using appropriate techniques.

0263.E2.O2Protect surrounding surfaces with drop sheets, masking or removal of objects.

0263.E2.O3Check that where doors, windows and associated furniture are removed they are safely stacked, stored and protected.

0263.E2.O4Check work site to ensure provision of adequate ventilation and implementation of precautions to prevent fire and explosion.

0263.E2.O5Implement measures to ensure application area remains free of dust and foreign matter.

E3Stain bare timber surface.

0263.E3.O1Match stain colour to previously stained timber.

0263.E3.O2Select application method for the specified surface, allowing for aesthetics durability, area size and type of finish.

0263.E3.O3Select materials appropriate to the work application, calculate quantities and prepare and handle safely.

0263.E3.O4Select tools and equipment, check for serviceability and rectify and report any faults.

0263.E3.O5Prepare stain to required proportions and consistency.

0263.E3.O6Apply stain to timber surface according to work instructions.

0263.E3.O7Mix colour-matched wood filler and apply to timber.

E4Apply clear finish.

0263.E4.O1Apply coats of selected clear finish to achieve required finish and sheen.

0263.E4.O2Allow required drying and curing time between coats.

E5Clean up.

0263.E5.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0263.E5.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0263.E5.O3Check and maintain tools and equipment and clean with appropriate solvents.

0263.E5.O4Dispose of paint waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0263.E5.O5Store tools, equipment and sealed unused materials to avoid spontaneous ignition.