Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove and apply wallpaper

KHU-CON-0264

Australian Equivalent

CPCCPD3027

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply wallpaper to walls of different materials to form a protective and decorative finish. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0264.E1.O1Review work instructions for details of requirements to apply wallpaper.

0264.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0264.E1.O3Prepare plan for hanging wallpaper.

0264.E1.O4Select and fit personal protective equipment (PPE) as required for each task.

0264.E1.O5Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0264.E1.O6Identify the types and quantities of materials required for the task and safely prepare and position ready for use.

0264.E1.O7Check wallpaper for conformity to pattern number, batch number and other shading requirements.

0264.E1.O8Select tools and equipment, check for serviceability and report any faults.

E2Remove wallpaper and prepare surface.

0264.E2.O1Determine type, condition and nature of existing wallpaper.

0264.E2.O2Select surface preparation method in accordance with environmental, finish and substrate requirements.

0264.E2.O3Remove wallpaper using appropriate tools.

0264.E2.O4Prepare surfaces by removing loose debris.

0264.E2.O5Repair surface defects and imperfections, and stop, fill and sand to smooth finish.

0264.E2.O6Conduct adhesion test and take any required remedial action.

E3Prepare to apply wallpaper.

0264.E3.O1Seal wall using appropriate material.

0264.E3.O2Prepare adhesives in accordance with safe workplace procedures.

0264.E3.O3Apply size coating to work area and allow to dry.

E4Apply wallpaper/lining paper to walls and ceilings.

0264.E4.O1Apply wallpaper/ lining paper ensuring an even surface, seams are butted, paper is plumb and pattern matches.

0264.E4.O2Trim accurately around fittings.

0264.E4.O3Remove residue for a clean finish.

E5Clean up.

0264.E5.O1Clean-up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0264.E5.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0264.E5.O3Check and maintain tools and equipment and clean with appropriate solvents.

0264.E5.O4Dispose of waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0264.E5.O5Store tools, equipment and unused materials in accordance with workplace practices.