SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply decorative paint finishes

KHU-CON-0265

Australian Equivalent

CPCCPD3028

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply decorative paint finishes to a range of different material surfaces. The unit includes: preparation of the application area application of: mirror paint finishes broken colour effects modern acrylic finishes lining by brush basic stencilling basic special effects completion of clean-up activities. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements a

Elements & Learning Outcomes

E1Plan and prepare.

0265.E1.O1Review work instructions to apply decorative paint finishes and select method of application.

0265.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0265.E1.O3Select and fit personal protective equipment (PPE) as required for each task.

0265.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0265.E1.O5Identify the types and quantities of materials required for the task and safely prepare and position ready for use.

0265.E1.O6Select tools and equipment, check for serviceability and report any faults.

E2Prepare application area.

0265.E2.O1Check that materials and substrate surfaces are prepared in accordance with manufacturer recommendations and relevant Australian Standards.

0265.E2.O2Protect surrounding surfaces by drop sheets, masking or removal of objects.

0265.E2.O3Check work site to ensure provision of adequate ventilation and implementation of precautions to prevent fire and explosion.

0265.E2.O4Implement measures to ensure application area remains free of dust and foreign matter.

0265.E2.O5Set-up area to apply decorative paint finishes.

E3Apply mirror paint finish.

0265.E3.O1Apply prime and intermediate coats, allow to dry thoroughly and sand to a smooth, even finish.

0265.E3.O2Adjust paint viscosity to suit climatic conditions and selected application method.

0265.E3.O3Prepare surface for final coat of mirror paint finish.

0265.E3.O4Apply final coat without imperfections, flowing out to an even, smooth finish and meeting all requirements.

E4Apply broken colour effects.

0265.E4.O1Apply ground coat evenly to prepared surface to specified colour and consistency.

0265.E4.O2Apply scumble glaze to prepared base coat and produce broken colour effect to match sample.

0265.E4.O3Apply clear coating to achieve an even finish to specified sheen level.

E5Apply modern acrylic finishes.

0265.E5.O1Prepare surface for application of acrylic finish.

0265.E5.O2Apply acrylic finish to achieve an even finish to specification.

E6Apply lining by brush.

0265.E6.O1Set out lining work to designed effect on prepared surface.

0265.E6.O2Select paint materials, applicators and brushware for lining work.

0265.E6.O3Apply application techniques to produce designed lining work effects and finish to requirements.

E7Apply basic stencilling.

0265.E7.O1Use specified transfer method and cut design accurately using a register mark.

0265.E7.O2Lay out stencil design on recommended material.

0265.E7.O3Place and tape initial stencil to designed location.

0265.E7.O4Apply paint to achieve designed effect.

E8Apply basic special finishes.

0265.E8.O1Select special effect materials, applicators and brushware.

0265.E8.O2Apply a range of traditional and modern special finishes to produce specified effects and finish.

E9Clean up.

0265.E9.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0265.E9.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0265.E9.O3Check and maintain tools and equipment and clean with appropriate solvents.

0265.E9.O4Dispose of paint waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0265.E9.O5Store tools, equipment and sealed unused materials to avoid spontaneous ignition.