Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Remove graffiti and apply anti-graffiti coatings

KHU-CON-0266

Australian Equivalent

CPCCPD3029

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to remove graffiti and apply preventative materials to different surfaces to form graffiti-resistant surface systems. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0266.E1.O1Review work instructions to remove graffiti and apply protective coatings.

0266.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0266.E1.O3Select and fit personal protection equipment PPE as required for each task.

0266.E1.O4Inspect work site, inspect and identify existing coating, assess hazards and apply risk controls, including required signage and barricades.

0266.E1.O5Identify materials appropriate to the work application, calculate quantities and prepare, handle safely and locate ready for use.

0266.E1.O6Select tools and equipment, check for serviceability and rectify and report any faults.

E2Prepare site and materials.

0266.E2.O1Set-up site area for graffiti removal and preventative application processes.

0266.E2.O2Protect surrounding surfaces with drop sheets, masking or removal of objects.

0266.E2.O3Check work site to ensure provision of adequate ventilation and implementation of precautions to prevent fire and explosion.

0266.E2.O4Install storm water protection systems.

E3Remove graffiti.

0266.E3.O1Apply selected removal processes to remove graffiti.

0266.E3.O2Remove graffiti from affected area following manufacturers’ specifications.

E4Apply anti-graffiti coating.

0266.E4.O1Clean and prepare substrate surfaces for application of sacrificial and non-sacrificial anti-graffiti coatings.

0266.E4.O2Prepare and apply selected anti-graffiti coatings following manufacturers’ specifications.

E5Clean up.

0266.E5.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0266.E5.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0266.E5.O3Check and maintain tools and equipment and clean with appropriate solvents.

0266.E5.O4Dispose of paint waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0266.E5.O5Store tools, equipment and sealed unused materials to avoid spontaneous ignition.