Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply protective paint coating systems

KHU-CON-0267

Australian Equivalent

CPCCPD3030

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply specialised paint coating systems as a protective measure against atmospheric conditions, sanitation and hygiene risks and the impacts of high traffic areas. The unit includes preparation of the work area and materials, application of the coating system and clean-up activities. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at

Elements & Learning Outcomes

E1Plan and prepare.

0267.E1.O1Review work instructions to apply protective paint coating systems and select method of application consistent with the job location, type of paint, type and condition of surface and climatic conditions.

0267.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0267.E1.O3Select and fit personal protective equipment (PPE) as required for each task.

0267.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0267.E1.O5Identify materials appropriate to the work application, calculate quantities and prepare, handle safely and locate ready for use.

0267.E1.O6Select tools and equipment, check for serviceability and rectify and report any faults.

E2Prepare work site and surfaces.

0267.E2.O1Protect surrounding surfaces with drop sheets, masking or removal of objects.

0267.E2.O2Ensure ventilation is adequate and implement precautions to prevent fire and explosion.

0267.E2.O3Implement measures to ensure application area remains free of dust and foreign matter.

0267.E2.O4Determine suitability of surface for protective paint coating and select surface preparation method to meet substrate requirements.

0267.E2.O5Prepare surface, repair, stop and fill imperfections, and sand to a smooth finish ready for the protective coating.

0267.E2.O6Prepare and mix protective coatings to manufacturers’ specifications.

E3Apply protective coating.

0267.E3.O1Apply and finish protective coating system to requirements.

0267.E3.O2Perform wet film thickness measurement on wet surface for quality assurance and rectify any issues.

0267.E3.O3Perform dry film thickness measurement on dry surface for quality assurance and rectify any issues.

E4Clean-up.

0267.E4.O1Clean-up in accordance with all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0267.E4.O2Identify hazardous material for separate handling by authorised personnel.

0267.E4.O3Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0267.E4.O4Check and maintain tools and equipment and clean with appropriate solvents.

0267.E4.O5Dispose of paint waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0267.E4.O6Store tools and equipment, and seal and segregate unused materials to avoid spontaneous ignition.