Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Apply advanced wall coverings

KHU-CON-0269

Australian Equivalent

CPCCPD3032

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to apply wall coverings to walls and ceilings to form a protective and decorative finish. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0269.E1.O1Review work instructions for details of requirements to apply wall coverings.

0269.E1.O2Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.

0269.E1.O3Select and fit personal protective equipment (PPE) as required for each task.

0269.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0269.E1.O5Identify the types and quantities of materials required for the task and safely prepare and position ready for use.

0269.E1.O6Select tools and equipment, check for serviceability and report any faults.

E2Prepare to apply wall coverings.

0269.E2.O1Prepare surfaces for wall coverings by removing existing coating and loose debris, repairing, stopping and filling imperfections, and sanding to smooth finish.

0269.E2.O2Prepare and document plan for hanging wall coverings.

0269.E2.O3Check materials for conformity to dye lot, batch number and other shading requirements in accordance with client requirements.

0269.E2.O4Prepare adhesives in accordance with requirements.

0269.E2.O5Apply size coating to work area.

E3Apply wall coverings.

0269.E3.O1Apply wall coverings to work area ensuring an even surface, seams are butted/double-cut, paper is plumb, and pattern is matched correctly.

0269.E3.O2Trim accurately around fittings with minimal impact on surroundings.

E4Clean up.

0269.E4.O1Clean up, meeting all legislative and workplace requirements for safety, waste disposal, materials handling and protection of the environment.

0269.E4.O2Clear work area, reuse or recycle materials and place waste and unwanted materials into job waste bins or rubbish stockpile.

0269.E4.O3Check and maintain tools and equipment and clean with appropriate solvents.

0269.E4.O4Dispose of waste and water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.

0269.E4.O5Store tools, equipment and unused materials.