Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Use roof tiling tools and equipment

KHU-CON-0281

Australian Equivalent

CPCCRT2002

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to safely and effectively use hand and power tools and equipment for roof tiling. The unit is suitable for those with basic skills and knowledge working under the direction of more experienced workers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare to use roof tiling tools and equipment.

0281.E1.O1Read and interpret work instructions and plan sequence of work.

0281.E1.O2Plan all work to comply with laws and regulations, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.

0281.E1.O3Select and use personal protective equipment (PPE) for each stage of the task.

0281.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

E2Select and check tools and equipment.

0281.E2.O1Identify functions and limitations of tools and equipment used in roof tiling.

0281.E2.O2Select tools and equipment for the task based on their functions and limitations, check for serviceability and report any faults.

0281.E2.O3Check that power tools and electrical leads are tested and tagged.

0281.E2.O4Conduct pre-operational checks on tools and equipment to manufacturers’ specifications.

0281.E2.O5Examine power tools and equipment to ensure guards are fitted and working, blades and attachments are secured, and switches are operational.

E3Use tools and equipment.

0281.E3.O1Connect power and/or compressed air supply to work area.

0281.E3.O2Perform start up and shut down procedures in accordance with manufacturers’ specifications.

0281.E3.O3Use tools safely and effectively according to manufacturers’ specifications.

0281.E3.O4Switch-off and locate tools safely when not in immediate use.

0281.E3.O5Inspect, maintain and tag tools and equipment and report any faults.

0281.E3.O6Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications