Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Repair and renovate tile roofs

KHU-CON-0285

Australian Equivalent

CPCCRT3004

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to repair and renovate roof tiles on different roof structures. It includes preparation, and replacement and fixing of tiles to the roof. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision . Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare to repair and renovate roofs.

0285.E1.O1Read and interpret work instructions and plan sequence of work.

0285.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications and workplace requirements.

0285.E1.O3Select and use personal protective equipment (PPE) for each stage of the task.

0285.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0285.E1.O5Select tools and equipment, check for serviceability and report any faults.

0285.E1.O6Select materials required for task, calculate quantities, handle safely, and prepare and position ready for use.

E2Prepare roof area.

0285.E2.O1Locate damaged area from plans and specifications.

0285.E2.O2Check that fall safety devices have been installed correctly.

0285.E2.O3Remove damaged tiles with minimum disturbance to remaining roof tiles.

0285.E2.O4Remove pointing or bedding without damage to roof tiles.

0285.E2.O5Clean damaged area and remove loose waste.

0285.E2.O6Check roof battens, sarking, boarding and flashing installations for soundness and adequacy.

E3Replace roof tiles.

0285.E3.O1Inspect each replacement tile for match to existing tiles and relocate existing tiles to allow for aesthetic blending.

0285.E3.O2Mix bedding to Australian Standards.

0285.E3.O3Lay tiles to existing design, gauge, alignment and bond specifications.

0285.E3.O4Strike bedding joints to match existing colour.

E4Replace pointing material.

0285.E4.O1Mix pointing material to Australian Standards.

0285.E4.O2Apply pointing material to ridge tile joints.

0285.E4.O3Point joints/collars to match finish to existing surrounds.

E5Clean up.

0285.E5.O1Remove loose material from roof tile surface, clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.

0285.E5.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.