Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Erect and dismantle basic scaffolding

KHU-CON-0289

Australian Equivalent

CPCCSC2002

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to erect and dismantle a range of modular scaffolding systems to provide work platforms for construction purposes. Scaffolding systems include edge protection, access ways and falsework (scaffold support systems for formwork). It applies to those who work under the direction of more experienced workers to erect and dismantle a range of modular scaffolding systems. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work , is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relev

Elements & Learning Outcomes

E1Plan and prepare to erect and dismantle basic scaffolding.

0289.E1.O1Read work order and associated documentation and clarify work tasks with relevant persons.

0289.E1.O2Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.

0289.E1.O3Select plant, tools and equipment, check for serviceability and rectify or report any faults.

0289.E1.O4Select and inspect scaffolding and components, and label and reject damaged components.

0289.E1.O5Calculate expected loading on scaffold and supporting structure using load tables and manufacturer specifications.

0289.E1.O6Identify site access and egress routes.

E2Whip, tie, splice and inspect ropes.

0289.E2.O1Inspect whipping cord and fibre rope for damage and wear.

0289.E2.O2Whip designated rope ends in accordance with work order and regulatory requirements.

0289.E2.O3Splice designated rope ends in accordance with work order and regulatory requirements.

0289.E2.O4Apply and inspect bends and hitches in accordance with work order.

E3Erect basic scaffolding.

0289.E3.O1Erect required safety signage and barricades and fit personal protective equipment (PPE).

0289.E3.O2Select sole board/base plate in accordance with regulatory and manufacturer requirements.

0289.E3.O3Set out and erect scaffolding in accordance with regulatory and manufacturer requirements.

0289.E3.O4Erect and install static lines where specified in accordance with regulatory requirements.

0289.E3.O5Assemble and erect lifting device as specified.

E4Inspect, repair and alter erected basic scaffolding.

0289.E4.O1Inspect erected modular scaffolding for damage, corrosion, wear and compatibility.

0289.E4.O2Check current use of scaffolding against original design and confirm that it is in accordance with regulations and specifications.

0289.E4.O3Inspect and confirm scaffolding stability.

0289.E4.O4Carry out alteration or repair as necessary and within own level of responsibility.

0289.E4.O5Complete and date inspection log and handover certificate, ready for signing by a certified scaffolder.

E5Dismantle basic scaffolding.

0289.E5.O1Isolate scaffolding with appropriate signage and barricades to ensure safe dismantling.

0289.E5.O2Dismantle scaffolding, reversing procedure followed for erection.

E6Clean up.

0289.E6.O1Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.

0289.E6.O2Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.