SKILLS PORTAL

ព្រះរាជាណាចក្រកម្ពុជា · KINGDOM OF CAMBODIA

Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Cut and bend materials using oxy-LPG equipment

KHU-CON-0293

Australian Equivalent

CPCCSF2003

Elements

Learning Outcomes

This unit of competency specifies the skills and knowledge required to heat, cut and bend construction materials using oxy-LPG equipment. It includes: planning and preparing for the work setting up and testing equipment cutting material heating and bending material shutting down equipment completing clean-up activities. It also includes the use of oxy-LPG-acetylene equipment to cut and bend materials for steelfixing applications. It does not involve specialist welding techniques. It applies to workers working alone or as a member of a team. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare to cut and bend materials using oxy-LPG equipment.

0293.E1.O1Review and clarify task to cut and bend materials using oxy-LPG equipment.

0293.E1.O2Review task specifications and check to make sure they are in accordance with legislation, regulations and codes of practice.

0293.E1.O3Review work health and safety (WHS) requirements for the task in accordance with safety plans and policies.

0293.E1.O4Identify safety signage and barricade requirements.

0293.E1.O5Review environmental requirements for the task in accordance with environmental plans and legislative requirements.

0293.E1.O6Select plant, tools and equipment, check for serviceability and rectify or report any faults.

0293.E1.O7Calculate material quantity requirements.

0293.E1.O8Acquire materials for the task and locate them safely ready for use.

E2Set up and test oxy-LPG equipment.

0293.E2.O1Erect identified safety signage and barricades, and fit personal protective equipment (PPE).

0293.E2.O2Select appropriate fire extinguisher and locate it to be readily accessible prior to and during operations.

0293.E2.O3Attach regulators to oxy and acetylene bottles in accordance with manufacturers’ specifications and WHS regulations.

0293.E2.O4Purge lines to manufacturers’ specifications prior to lighting up.

0293.E2.O5Test equipment for leaks and either undertake corrective action or report faults.

0293.E2.O6Select appropriate pressures and cutting tips in accordance with material to be cut and manufacturers’ specifications.

E3Cut material with oxy-LPG equipment.

0293.E3.O1Mark material accurately and secure or clamp ready for cutting.

0293.E3.O2Light torch in accordance with manufacturer’s specifications.

0293.E3.O3Adjust setting of flame for cutting to manufacturers’ specifications.

0293.E3.O4Adopt correct cutting position to set-out mark during cutting.

E4Heat and bend material using oxy-LPG equipment.

0293.E4.O1Mark material accurately and secure or clamp ready for bending.

0293.E4.O2Light torch in accordance with manufacturer’s specifications.

0293.E4.O3Apply heat to specified material and minimise weakening effects of the heating process.

0293.E4.O4Bend material to specification and cool appropriately.

E5Shut-down oxy-LPG equipment.

0293.E5.O1Switch off torch in accordance with manufacturers’ specifications.

0293.E5.O2Shut off gas supply in accordance with manufacturers’ specifications.

E6Clean up after cutting, heating and bending materials using oxy-LPG equipment.

0293.E6.O1Clear work area and dispose of, re-use or recycle materials in accordance with legislation, regulations, codes of practice and task requirements.

0293.E6.O2Clean, check, maintain and store plant, tools and equipment in accordance with manufacturers’ specifications and workplace requirements.