Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Install pre-cast decorative mouldings

KHU-CON-0327

Australian Equivalent

CPCCSP3005

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to install pre-cast decorative mouldings to masonry, plasterboard and cement sheets. It includes measuring, cutting and fixing of cast plaster and finishing junctions for painting. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them, without close supervision. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit C PCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare to install pre-cast decorative mouldings.

0327.E1.O1Read and interpret work instructions and plan sequence of work.

0327.E1.O2Plan all work to comply with laws and regulations, the National Construction Code (NCC), Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, and workplace requirements.

0327.E1.O3Select and use personal protective equipment (PPE) for each stage of the task.

0327.E1.O4Inspect work site, assess hazards and apply risk controls, including required signage and barricades.

0327.E1.O5Select tools and equipment, check for serviceability and report any faults.

0327.E1.O6Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.

E2Install pre-cast moulded archway.

0327.E2.O1Check substrate and set out and cut archway profile to specifications.

0327.E2.O2Cut, position and fix timber arch soffit templates.

0327.E2.O3Fix infill moulding to arch soffit and reveals of opening.

0327.E2.O4Stop arch to specifications and level of finish.

E3Fix plaster panelled ceiling.

0327.E3.O1Set out, position, fix and space ceiling battens for cornice margins and flush mounted panels.

0327.E3.O2Locate, level and line-up, and fix panels on ceiling.

0327.E3.O3Finish jointing to meet ceiling plastering requirements.

0327.E3.O4Sand and clean surface in preparation for painting.

E4Fix ornamental mouldings.

0327.E4.O1Measure and cut ornamental mouldings to specification.

0327.E4.O2Select fastening method for moulding.

0327.E4.O3Set out and mark position of ornamental moulding.

0327.E4.O4Position and fix moulding straight and level.

0327.E4.O5Finish mouldings, including straight stoppings and mitres to specification.

E5Clean up.

0327.E5.O1Clear work area, dispose of materials, and reuse or recycle in compliance with legislation, regulations and codes of practice.

0327.E5.O2Clean, check, maintain and store tools and equipment in accordance with manufacturers’ specifications.