Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Finish stone

KHU-CON-0332

Australian Equivalent

CPCCST2003

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to cut and finish both hard and soft stone. It includes determining stone hardness prior to cutting and finishing stone. The unit is suitable for people with basic skills and knowledge who undertake routine stonemasonry work tasks under the direction of more experienced workers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan and prepare.

0332.E1.O1Read, interpret and apply finish stone requirements from current plans, specifications, standards and codes and confirm information with relevant person.

0332.E1.O2Follow requirements in workplace safety and environmental documentation and workplace procedures.

0332.E1.O3Clarify job priorities and sequence job tasks in consultation with other workers.

0332.E1.O4Identify potential hazards and implement control measures.

0332.E1.O5Select and check condition of plant, equipment and tools and report damage or faults to relevant person.

0332.E1.O6Check conformity of materials against the job requirements and place stone ready for the work.

0332.E1.O7Identify stone hardness using Mohs scale of mineral hardness.

E2Cut stone.

0332.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0332.E2.O2Mark stone and position onto cutting table to obtain maximum efficiency in cutting.

0332.E2.O3Align stone to cutting blade and secure in position to ensure stability.

0332.E2.O4Adjust machinery to maximum depth of cut for size of stone.

0332.E2.O5Apply coolant as required for stone and job requirements.

0332.E2.O6Use primary and secondary cutting machines appropriate to their cutting capacity.

E3Polish stone.

0332.E3.O1Prepare stone with adhesives or fillers.

0332.E3.O2Set up and operate polishing heads.

0332.E3.O3Polish stone using various hand-operated and static polishing machines.

0332.E3.O4Apply adhesives, tinting for fillers and reinforcing materials to job requirements.

0332.E3.O5Clean stone face surfaces and apply finishes.

E4Clean up.

0332.E4.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0332.E4.O2Clean tools and equipment, check for serviceability and report damage or faults.

0332.E4.O3Store and secure tools and equipment following workplace procedures.