Cambodian Skills Delivery Model

SEAL National Course Catalogue · MLVT / National Training Board

Sector Frameworks

1,164

Qualifications

15,161

Competency Units

10,938

Elements

41,782

Learning Outcomes

2,822

Assessment Packages

Lay stone

KHU-CON-0333

Australian Equivalent

CPCCST2004

Elements

Learning Outcomes

This unit specifies the skills and knowledge required to use a variety of stones to construct stone structures, such as freestanding and garden walls, load bearing structural walls and veneer facing. The unit is suitable for people with basic skills and knowledge who undertake routine stonemasonry work tasks under the direction of more experienced workers. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.

Elements & Learning Outcomes

E1Plan the work.

0333.E1.O1Read and interpret lay stone requirements from current plans, specifications, standards and codes and confirm information with relevant person.

0333.E1.O2Source and follow relevant information from workplace safety and environmental documentation and workplace procedures.

0333.E1.O3Calculate material quantities for the task using measurements and formulas.

0333.E1.O4Clarify job priorities and sequence job tasks in consultation with others on site.

0333.E1.O5Identify potential hazards and implement control measures.

0333.E1.O6Select and check condition of plant, equipment and tools and report damage or malfunction to relevant personnel.

0333.E1.O7Check conformity of materials against the specifications.

E2Prepare for work.

0333.E2.O1Select, fit correctly and use personal protective equipment (PPE) appropriate for job.

0333.E2.O2Identify structural, construction and finish details of wall.

0333.E2.O3Set out and mark position, length and height of wall.

0333.E2.O4Sort and blend stone and place in preparation to commence work.

0333.E2.O5Mix mortar to colour and consistency and place on mortar board ready for use.

E3Lay stone.

0333.E3.O1Lay base stone and fix ties and reinforcing and install drainage, flashing and ties.

0333.E3.O2Lay stone to a sequence and maintain face to a set line.

0333.E3.O3Lay stone to height maintaining shape, consistent joint size, level and plumb.

0333.E3.O4Lay wall capping and clean face of stone wall.

E4Fix stone slabs.

0333.E4.O1Prepare existing wall for stone application.

0333.E4.O2Mix and apply adhesives, mortar or plaster to job requirements.

0333.E4.O3Secure stone with ties or dowels.

0333.E4.O4Fix stone level, plumb with even joints.

0333.E4.O5Remove excessive mortar or adhesive.

0333.E4.O6Clean face of stonework.

E5Clean up.

0333.E5.O1Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.

0333.E5.O2Clean tools and equipment, check for serviceability and report damage or faults.

0333.E5.O3Store and secure tools and equipment following workplace procedures.